18
Recording, Searching, and Playing Images
Chap
te
r 2
O
per
at
ion
an
d Cont
rol
3
Select the desired preset number for the new present
and then click [Save].
The new preset position is configured.
The number of presets depends on the type of camera
used. For details, refer to the user’s guide for your
camera.
Recording, Searching,
and Playing Images
You can record live images, and search and play back
recorded image data and audio data.
This section describes the following operations.
•
Recording Camera Images (page 18)
You can record the images currently being captured by a
camera.
•
Playing Recorded Images (page 19)
Simple operations are available for playing recorded
images, including instant playback for automatically
rewinding a specified amount of time and playing,
specifying the playback position by date and time, and
playing from alarm history.
•
You can search for and play back recorded images
according to a specified event (sensor input, movement
detection, or loss of video signal)
•
You can bookmark recorded images for quick retrieval.
Recording Camera Images
You can manually start and stop the recording of camera
images according to the recording settings configured in
the “Recording Setting” screen. When you start or stop
recording, the operation is performed for all cameras.
• You cannot start recording images from a camera for
which [Recording Mode] is set to [No Recording] in the
“Recording Setting” screen.
• If no live images are displayed, click [LIVE] on the
upper right corner of the screen.
1
Click
(Record).
If continuous recording or motion detection recording
is in progress, clicking
(Record)
will stop the recording. In such cases, click
again to start recording manually.
Recording starts.
Note
Notes
Summary of Contents for Ipela NSR-S10
Page 67: ......
