Sony ILME-FR7 Help Manual Download Page 228

Page: 228 / 458

Help Guide

Interchangeable Lens Digital Camera

ILME-FR7 / ILME-FR7K

Changing a LUT

You can change the LUT to apply.

Hint

The unit provides [s709], [709(800%)], and [S-Log3] as preset LUTs.

You can also import and apply a 3D LUT file. For details, see “

Importing a Desired Base Look

” and “

Deleting a Base Look

.”

This can also be set using [Paint/Look] > [Base Look] > [Select] in the camera menu.

Press the [Base Look/LUT] button in the camera basic configuration panel.

The frame of the [Base Look/LUT] button changes to orange.

The Base Look/LUT adjustment panel appears.

Press the [Base Look/LUT] button and select the base look to apply.

228

Summary of Contents for ILME-FR7




















































































































































































































































































































































































































































Search results

Summary of Contents for ILME-FR7

Reviews:

Related manuals for ILME-FR7

Brands by name

Popular brands

Sony ILME-FR7, Help Manual

Search results

Summary of Contents for ILME-FR7

Reviews:

Related manuals for ILME-FR7

Brands by name

Popular brands