Sony ILME-FR7 Help Manual Download Page 148

Page: 148 / 458

Help Guide

Interchangeable Lens Digital Camera

ILME-FR7 / ILME-FR7K

Saving/Restoring Pan/Tilt and Zoom Position Using the Supplied Infrared Remote
Control

You can save the pan/tilt and zoom position and recall them when required using the supplied infrared remote control.

Adjust the pan/tilt and zoom of the camera.

Press and hold the PRESET button and press one of the 1 to 3 buttons.

The position is saved.

Restore a saved position.

Press one of the 1 to 3 buttons with a saved position to restore that position.

Hint

In the case of the infrared remote control, the image moves to the saved position at the maximum speed.
You can also change the transition speed after saving. For details, see “

Changing the Transition Speed of Position

Presets

.”

148

Summary of Contents for ILME-FR7




















































































































































































































































































































































































































































Search results

Summary of Contents for ILME-FR7

Reviews:

Related manuals for ILME-FR7

Brands by name

Popular brands

Sony ILME-FR7, Help Manual

Search results

Summary of Contents for ILME-FR7

Reviews:

Related manuals for ILME-FR7

Brands by name

Popular brands