2-70
ILCE-6400/6400L/6400M
Continued on next page.
– Front view –
– Front view –
– Front view –
insulating sheet (A)
protection sheet (LC)
SY WP sheet (upper)
trans insulating sheet
sheet EM shield BN
tape AS 1/2
MDV-2000 flexible board
Align the positions of the two holes.
EYE sensor cushion
heat sheet (EV)
soft gasket (0.5
u
3 (18))
sheet plate
shoe WP
sheet
shoe WP
sheet
shoe WP
shoe sheet (WP)
Push it into the gap.
: guide line
– Rear view –
– Rear view –
– Rear view –
• SY base block
• shoe block assy
• VF block
• SY heat sink
0 to 0.5 mm
0 to 0.5 mm
– Bottom view –
– Top view –
– Top view –
– Front view –
0 to 0.5 mm
Fold.
± 0.5 mm
0 to 0.5 mm
0 to 0.5 mm
0 to 0.5 mm
0 to 0.5 mm
0 to 0.5 mm
0 to
0.3 mm
0 to 0.3 mm
0 to 0.3 mm
0 to
0.3 mm
0 to
0.3 mm
0 to 0.3 mm
0 to 0.3 mm
0 to
0.3 mm
– Rear view –
0 to 1.0 mm
0 to 1.0 mm
Note:
Be careful not to cover the red frame area.
Note:
Make sure there are no wrinkles
or kinks in the shoe sheet (WP).
0 to 0.3 mm
0 to 1.0 mm
0 to 1.0 mm
Fold.
Fold.
rear side
0 to 1.0 mm
0 to 1.0 mm
SYS SET
2019/01/30 02:39:50 (GMT+09:00)
