When the desired access point is not displayed on the screen:
Select
[Manual Setting] and set the access point.
*
For the input method, refer to “How to use the keyboard.”
If you select [Manual Setting], input the SSID name of the access point, then select the
security system.
3. Input the password, and select [OK].
Access points without the
mark do not require a password.
4. Select [OK].
How to use the keyboard
When manual character entry is required, a keyboard is displayed on the screen.
1.
Input box
The characters you entered are displayed.
2.
Switch character types
Each time you press
on the center of the control wheel,
the character type switches among alphabet letters, numerals and symbols.
3.
Keyboard
Each time you press
on the center, the character that you enter will be
displayed.
For example: If you want to enter “abd”
Select the key for “abc” and press
once to display “a” → select “
”((5) Move
cursor) and press
→ select the key for “abc” and press
twice to display “b” →
select the key for “def” and press
once to display “d”.
4.
Finalize
Finalizes the entered characters.
5.
Move cursor
Moves the cursor in the input box to the right or left.
6.
Delete
Deletes the character preceding the cursor.
