background image

24

Other

Recycling of Lithium Ion Battery

Battery manufacturer are obligated to collect and recycle 
lithium ion batteries, as used in these energy storage 
modules, based on the law, “Act on the Promotion of 
Effective Utilization of Resources” (enforced from April 2001), 
issued in Japan. When disposing of the set, please recycle 
and observe local regulations to protect the environment.

Please contact Sony sales representative for details on 
recycling batteries.

Inquiries and Services

ˎ

ˎ

In case of product failure (hardware) during appropriate 
use during the warranty period, please contact Sony 
customer services. We will repair free of charge.

ˎ

ˎ

The following cases are exempt from warranty cover:

(1)  Requesting repair after warranty period for failure occurring 

within warranty period.

(2)  Failure/Damage due to misuse (includes when proper 

handling based on the Users’ Manual, Caution Label on 
product, etc., is neglected).

(3)  Failure caused by other devices or damage by inappropriate 

repair or modification.

(4)  Failure/Damage caused by relocation, transportation, 

dropping, etc., after purchase.

(5)  Failure/Damage from fire, earthquake, wind, flood, thunder, 

or other natural disaster, public hazard, salt damage, 
abnormal voltage, etc.

ˎ

ˎ

Please contact Sony sales representative for inquires and 
warranty on the product

Summary of Contents for IJ1001C

























Reviews: