Sony IFB-X600E, Service Manual

Page: 18 / 146

1-12
VPL-S900E, VPL-S900M, VPL-S900U
22
(EN)
1
After all equipment is connected completely, plug the AC power cord
into the wall outlet.
The STANDBY indicator lights in red and the projector goes into the
standby mode.
2
Press the I /
u
key on the Remote Commander or on the control panel.
The ON indicator lights in green.
3
Turn on equipment connected to the projector. Press the INPUT key on
the Remote Commander or on the control panel to select the input
source.
INPUT A: Selects audio and video signals input from the INPUT A
connector.
INPUT B: Selects audio and video signals input from the INPUT B
connector.
VIDEO: Selects audio and video signals input from the AUDIO IN/
VIDEO (VIDEO IN) jacks.
S VIDEO: Selects audio and video signals input from the AUDIO IN/
S VIDEO (VIDEO IN) jacks.
Note
The AUDIO IN jacks are used as audio outputs of both VIDEO and S
VIDEO.
Note on the VPL-S900E model
The optional IFB-X600E Interface Board is required for selecting
VIDEO.
Projecting
Rear remote control detector
Front remote control detector
ON indicator
STANDBY indicator
COMMAND
MUTING
I /
u
INPUT
APA
MENU LASER
V
b B
v ENTER
RESET
VOLUME
+
–
R CLICK
PICTURE AUDIO
ON OFF
1
2
3
ON
I /
u
INPUT
MENU
+
VOLUME
–
LIGHT
PATTERN
APA
RESET
B
v
V
b
ENTER
POWER
SAVING
STANDBY TEMP/FAN LAMP/COVER
2
3
4
4, 6
5
APA key
APA key
23
(EN)
4
Press the PATTERN key on the control panel to display the H pattern,
and turn the focus ring to adjust the focus.
Press the PATTERN key again to clear the pattern.
5
Turn the zoom ring to adjust the size of the picture.
6
Turn the focus ring again to adjust the focus.
Note
Do not look into the lens when the projector lamp is on.
HHHH HHHH
HHHH HHHH
HHHH
HHHH
HHHH HHHH
HHHH HHHH
To Press
Adjust the volume the /– keys on the control
panel or on the Remoter Commander.
Cut off the sound the AUDIO MUTING key on the
Remote Commander. To restore the
sound, press the AUDIO MUTING key
again or press the key.
Cut off the picture the PICTURE MUTING key on the
Remote Commander. To restore the
picture, press the PICTURE MUTING
key again.
To get the clearest picture
You can get the suitable picture when a signal from the computer is input.
Press the APA key on the Remote Commander or on the control panel.
The picture is automatically adjusted to be projected clearest.
Notes
• Adjust the signal when the still picture is displayed on the screen.
• If you switch the input signal or re-connect a computer, press the APA
key again to get the suitable picture.
• “ADJUSTING” appears on the screen. Press the APA key again during
the adjustment to restore the original screen.
• “Complete!” appears on the screen when the picture is adjusted properly.
The picture may not be adjusted properly depending on the kinds of input
signals.
• Adjust DOT PHASE in the INPUT SETTING menu when you adjust the
picture manually.
For details on DOT PHASE, see page 28 (EN).