ICF-‐EX5MK2
Optimal Tuning for MW (Medium-‐Wave)
Receive MW broadcasts in the SYNC/Normal setting. To find the optimal synchronization
point, you may need to toggle to the LOWER or UPPER setting (see
Synchronous Detection
Circuit
section later in this booklet).
MW (Medium-‐Wave) Radio Station Display Board
Japan National Radio is divided into 10 districts. Each district has a main 10 kW
transmission power MW (Medium-‐Wave) broadcasting station. Each broadcasting
station’s name is on the radio display board. Without knowing the frequency of a station,
you can “tune” to the broadcasting station’s name on the display board to receive the
broadcast.
The radio station display board also shows 1 NHK and 2 NHK broadcasting and commercial
broadcasting stations (except relays). See the MW (Medium-‐Wave) Broadcast station list at
the end of this document.
Radio NIKKEI Frequency Switch
Radio NIKKEI reception will sometimes be inaudible due to Season, time and location.
Also broadcast time may differ by day of the week and the frequency. To tune Radio
NIKKEI, adjust the switch located above
t
he Indicator Light. Radio NIKKEI broadcasts at the
same time on three different frequencies (3, 6, 9 MHz). This radio has 6 built-‐in crystal
oscillators to receive all six frequencies. To change between these frequencies, move this
switch.
Radio NIKKEI Frequency
Radio NIKKEI 1
Radio NIKKEI 2
3 MHz
3.925 MHz
3.945 MHz
6 MHz
6.055 MHz
6.115 MHz
9 MHz
9.595 MHz
9.760 MHz
