IC Recorder
ICD-SX733/SX734/SX1000
Adding a track mark
You can add a track mark at a point at which you would like to divide a file later or
locate during playback. You can add a maximum of 98 track marks to each file.
1. During recording, playing back, or recording pausing, press TRACK MARK at the
position you want to add a track mark.
The (track mark) indicator flashes three times, and a track mark is added.
Note
You cannot add track marks to a protected file. To add track marks to the file,
release the protection first, and then add the track marks.
You cannot add track marks to music files or podcast files.
You cannot add track marks while using the synchronized recording function.
The illustrations used in this Help Guide are based on the ICD-SX1000 model. These
illustrations may look different from the model you are using, however, the buttons
and controls used for operations are the same.
Hint
To locate a track mark and start playback at the track mark, press
or
in the
stop mode. When the (Track mark) indicator flashes once, press
.
You can add track marks when the IC recorder is in the transcription playback mode.
Related Topic
184
Search
