manualshive.com logo in svg

Sony ICD PX720 - 1 GB Digital Voice Recorder, Operating Instructions Manual

Share
Download
Sony ICD PX720 - 1 GB Digital Voice Recorder Operating Instructions Manual Download Page 46

ICD-PX720  4-113-173-11(1)

GB

 

Press –

 or 

+ to select “ON,” 

then press 

 PLAY/STOP•ENTER.

3 

Set the alarm date and time.

 

Press –

 or 

+ to select “DATE,” a 

day of the week, or “DAILY,” then press 

 PLAY/STOP•ENTER.

 

When you select “DATE”:

 

Set the year, month, day, hour, and 

minute in sequence, as described in 

“Step 2: Setting the Clock” on page 16, 

then press 

 PLAY/STOP•ENTER. 

When you select a day of the week 

or “DAILY”:

 

Press –

 or 

+ to set the hour, 

then press 

 PLAY/STOP•ENTER, 

press –

 or 

+ to set the 

minute, then press 

 PLAY/

STOP•ENTER.

4 

Press –

 or 

+ to select the 

alarm sound either from “B-ONLY” 

or “B-PLAY,” then press 

 PLAY/

STOP•ENTER.

B-ONLY: Only the alarm will sound.
B-PLAY: The selected message will be 

played back after the alarm.

“ALARM ON” will be displayed.

5 

Press 

 (stop) to exit the menu 

mode.

The setting process is finished and “

” 

(alarm indicator) appears in the display 

window.

Summary of Contents for ICD PX720 - 1 GB Digital Voice Recorder

































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands