Sony IC Recorder ICD-PX312M, Operating Instructions Manual

Page: 43 / 132

43 GB
Oth
er R
e
cor
d
in
g
Op
er
ati
o
ns
4
Press z REC/PAUSE to start recording.
The built-in microphone is automatically
cut off, and the IC recorder starts
recording sounds from the external
microphone.
If the input level is not strong enough,
adjust the “
话筒灵敏度
” setting on the
IC recorder (page 80).
When a plug in power type microphone
is connected, power is automatically
supplied to the microphone from the IC
recorder.
5
Press x (stop) to stop recording.
z
Recommended microphones
You can use the Sony ECM-CS10 electret
condenser microphone (not supplied).
To record sound from a
telephone or a cell phone
You can use the ECM-TL1 headphone-type
electret condenser microphone (not
supplied) to record sound from a telephone
or a cell phone.
For details on how to make the connection,
refer to the operating instructions supplied
with the ECM-TL1 microphone.
P
Notes
• After you have made the connection, check
the sound quality of the conversation and the
recording level before you start recording.
• If the beep of the telephone or a dial tone is
recorded, the conversation may be recorded
with lower level of sound. In this case, start
recording after the conversation has started.
• The VOR function (page 36) may not work,
depending on the kind of telephone or the
line condition.
• We assume no responsibility whatsoever for
any inconvenience, even if you cannot
record a conversation using the IC recorder.