Sony HXR-NX200 Operating Manual Download Page 93

Page: 93 / 122

rou
bl

oot
in

Troubleshooting

If you run into any problems using your camcorder, follow the flow chart below.

• Power sources/LCD screen/Wireless Remote Commander (p. 93)
• Memory cards (p. 95)
• Recording (p. 95)
• Playback (p. 99)
• Connecting to TV (p. 100)
• Copying/Editing/Connecting to other devices (p. 100)
• Connecting to a computer (p. 101)

The power does not turn on or abruptly turns off.

• Attach a charged battery pack to the camcorder (p. 19).
• Use the AC Adaptor to connect the camcorder to a wall outlet (wall socket) (p. 19).

The camcorder does not operate even when the power is set to on.

• Disconnect the power source (battery or AC Adaptor), then reconnect it after about 1 minute.
• Select

(OTHERS)

INITIALIZE.

The camcorder gets warm.

• Camera body may get warm with use – this is normal.

The POWER/CHG lamp is not lit while charging the battery pack.

• Turn off the power.
• Reattach the battery pack correctly.
• Re-insert the plug in the power outlet correctly.
• The battery pack is already fully charged.

Check your camcorder, referring to the items on pages 93 to 101.

Disconnect the power source, reconnect the power source after about 1 minute and turn
on your camcorder.

Select

(OTHERS)

INITIALIZE.

This operation will reset the date, time and area settings.

Consult your Sony dealer or local authorized Sony service facility.

Power sources/LCD screen/Wireless Remote Commander

Continued

Summary of Contents for HXR-NX200



























































































































Search results

Summary of Contents for HXR-NX200

Reviews:

Related manuals for HXR-NX200

Brands by name

Popular brands

Sony HXR-NX200, Operating Manual

Search results

Summary of Contents for HXR-NX200

Reviews:

Related manuals for HXR-NX200

Brands by name

Popular brands