Sony HXR-NX200 Operating Manual Download Page 100

Page: 100 / 122

100

Neither image nor sound is played back on the TV connected with the HDMI
cable.

• Images are not output from the HDMI OUT jack if copyright protection signals are recorded

in the images.

• Signals are not output from the HDMI OUT jack when the USB jack is connected.

Neither image nor sound is played back on the TV, projector, or AV amplifier
connected with the HDMI cable.

• If you cannot view images or hear sound on the TV, projector, or AV amplifier connected

with the HDMI cable, try disconnecting and connecting the HDMI cable, or turn on your
camcorder again.

The image appears distorted on a 4:3 TV.

• This happens when viewing a movie recorded in the 16:9 (wide) mode on a 4:3 TV. Select

(REC/OUT SET)

[VIDEO OUT]

[DOWN CONVERT TYPE] and set the

appropriate down conversion type (p. 81).

Black zone appears at top and bottom of a 4:3 TV screen.

• This happens when viewing a movie recorded in the 16:9 (wide) mode on a 4:3 TV. This is

not a malfunction.

Time code and other information appear on the display of the connected
device.

• Set [DISPLAY OUTPUT] to [LCD PANEL] (p. 88).

Copy cannot be done correctly using the A/V connecting cable (sold
separately).

• The A/V connecting cable (sold separately) is not connected properly. Make sure that the

A/V connecting cable (sold separately) is connected to the input jack of the device.

Sound cannot be added to the recording media after recording.

• You cannot add sound to the recording media after recording on your camcorder.

Copy cannot be done correctly using the HDMI cable.

• You cannot copy movies using the HDMI cable.

Connecting to TV

Copying/Editing/Connecting to other devices

Summary of Contents for HXR-NX200



























































































































Search results

Summary of Contents for HXR-NX200

Reviews:

Related manuals for HXR-NX200

Brands by name

Popular brands

Sony HXR-NX200, Operating Manual

Search results

Summary of Contents for HXR-NX200

Reviews:

Related manuals for HXR-NX200

Brands by name

Popular brands