16
Status Display
System status
The camera model name and signal format are displayed at
the top of the page (a “-” mark is displayed instead when a
camera is not connected).
Reference
: Reference signal format and lock status
SDI-1/2
: SDI OUTPUT 1/2 connector output format setting
SDI-3/4
: SDI OUTPUT 3/4 connector output format setting
Component
: Component signal connector output format
setting
Return1
: Return 1 return signal format setting
Return2
: Return 2 return signal format setting
Return3
: Return 3 return signal format setting
Return4
: Return 4 return signal format setting
CCU hardware diagnostics
The camera Auto Setup category, and the corresponding
setup item and status are displayed at the top of the page.
DPR
: DPR board status
SDI
: SDI board status
SY
: SY board status
VIF
: VIF board status
Front Panel
: HKCU-FP1 CCU Control Panel status (displayed
only when the HKCU-FP1 CCU Control Panel is fitted)
Camera system diagnostics
Page 1
TRIAX Type
: Triax transmission mode
TRIAX Cable
: CCU triax cable connection status
TRIAX Comp.
: Triax cable compensation mode selection
TRIAX Step
: Triax cable compensation step (internal circuit
step display)
Fan Power
: CCU power supply fan status
Timer
: Elapsed time since power-on
CCU Power
: CCU power supply type and status
SerialNo
: CCU serial number
Page 2
CAMERA Cable
: Camera cable connection status
CAMERA Data
: Camera data transmission status
CAMERA Power
: Camera power supply status
CAMERA Tone
: Camera identification tone detection status
REMOTE Cable
: Remote device cable connection status
REMOTE Data
: Remote device data transmission status
REMOTE Power
: Remote device power supply status
Page 3
Intercom CCU
: CCU intercom selection
Intercom CAMERA CH1
: Camera intercom channel 1
selection and microphone status
Intercom CAMERA CH2
: Camera intercom channel 2
selection and microphone status
CAM MIC Gain
: Camera microphone circuit control selection
CAM MIC CH1
: Camera microphone channel 1 amplifier gain
CAM MIC CH2
: Camera microphone channel 2 amplifier gain
Network diagnostics
Page 1
MacAddress
: MAC address stored in CCU EEPROM
Auto Negotiation
: Auto negotiation setting
Auto MDI/MDIX
: Auto-MDIX setting
*System Status* 1/12
HXC-100 1080/59.94I
Reference:Free Lock
SDI-1/2 :1080/59.94I
SDI-3/4 :525/59.94I
Component:SD YCD
Return1 :1080/59.94I
Return2 :525/59.94I
Return3 :NTSC
Return4 :NTSC
*Diagnosis* 2/12
DPR :OK SDI :OK
SY :OK VIF :OK
Front Panel : OK
*System Diag 1/3* 3/12
TRIAX Type Digital
Cable Connect
Comp. Auto
Step 4
Fan Power OK
Timer 96H
CCU Power AC OK
SerialNo 100001
*System Diag 2/3* 4/12
CAMERA Cable Connect
Data OK
Power OK
Tone Detect
REMOTE Cable Connect
Data OK
Power OK
*System Diag 3/3* 5/12
Intercom
CCU Private
CAMERA CH1 ENG
MIC OFF
CH2 ENG
MIC OFF
CAM MIC Gain Local
CH1 60dB
CH2 60dB
*Network Diag 1/3* 6/12
MacAddress:000000-000000
Auto Negotiation: ON
Auto MDI/MDIX : ON
Connection Speed:100M
Duplex Mode :HALF
MDI/MDIX :MDIX
Link Status :OK