Sony HVR-M15AE Operating Instructions Manual Download Page 66

Page: 66 / 84

Chapter 5

Maintenance

Cha

r 5

nan

Warning Indicators and Messages

The following alarm messages will appear together with the alarm indicators. Take corrective action according to the
displayed message.

Alarm Messages

Item

Message

Cause/Corrective Action

Moisture
condensation

Moisture condensation. Eject the cassette.

See page 69 for details.

Moisture condensation. Turn off for 1H.

See page 69 for details.

Cassette/Tape

Insert a cassette.

See page 21.

Reinsert the cassette.

Check for damage to the tape or other
irregularities.

The tape is locked –check the tab.

See page 20.

The tape has reached the end.

—

Others

Cannot record due to copyright protection.

—

Change to correct tape format.

This is an unsupported format and cannot be
played back.

No output image in “HDV/DV SEL”. Change format.

Stop playback or signal input, or change the
[HDV/DV SEL] setting

(page 50)

Dirty video head. Use a cleaning cassette.

See page 67.

Unplug power cable.

—

Reinsert the cassette.

—

Invalid input signal.

The signal that has been input to the unit is
invalid. Check the input signal.

Power voltage error.

—

Summary of Contents for HVR-M15AE





















































































Search results

Summary of Contents for HVR-M15AE

Reviews:

Related manuals for HVR-M15AE

Brands by name

Popular brands

Sony HVR-M15AE, Operating Instructions Manual

Search results

Summary of Contents for HVR-M15AE

Reviews:

Related manuals for HVR-M15AE

Brands by name

Popular brands