86
[MWM Server 2] Tab
Configure MWM server settings.
[Patient Name Component]
Select the patient name component to be obtained.
The default setting is [1st Component].
[C-Store] Tab
Configure C-Store settings.
[C-Store]
Select whether to use C-Store.
The default setting is [Not Used].
[Confirm] appears when [Use] is selected. Confirm
communication with the C-Store server. For details, see
“To confirm communication with the C-Store server”
(page 86).
[Server Name]
Enter the server name.
This item is available when [C-Store] is set to [Use].
Up to 253 characters can be entered.
[Port No.]
Enter the port number.
This item is available when [C-Store] is set to [Use].
You can enter a value ranging from 1 to 65535 (up to 5
digits).
The default setting is [104].
[AE Title]
Enter the AE title.
This item is available when [C-Store] is set to [Use].
Up to 16 characters can be entered.
[Retry]
Select whether to retry operations, such as confirming
DICOM transmission and confirming communication
with the C-Store server.
The default setting is [Use].
[Advanced] appears when [Use] is selected. For details
on the settings, see “To configure the retry interval and
number of retries” (page 85).
To confirm communication with the C-
Store server
Confirm whether communication with the C-Store server
is enabled.
1
After configuring each setting in the [C-Store] tab,
select [Confirm] for [C-Store] and press the ENTER
button.
Communication confirmation starts. An indicator
appears during confirmation.
The results of confirmation appear when the process
is complete.
2
Select [OK], and press the ENTER button.
If proper communication with the C-Store server was not
established, refer to the cause displayed on the screen and
resolve the problem.
[Local Station 1] Tab
[AE Title], [Station Name]
Up to 16 characters can be entered.
[Facility Name]
Up to 64 characters can be entered.
[Facility Address]
Up to 128 characters can be entered.
[Local Station 2] Tab
Configure local station settings.
[SOP Class UID]
Select [SC] or [VL] for the SOP Class UID.
The default setting is [SC].
[Character Set]
Select the character set.
You can select from [IR6], [IR13], [IR100], and [IR101].
The default setting is [IR6].
Tip
Summary of Contents for HVO-3300MT
Page 99: ......
