5-1
HVL-F56AM
5. ADJUSTMENTS
Note:
After the service repair, perform the adjustments referring to this section.
5-1.
PREPARATIONS
5-1-1. Adjusting Items when Replacing the Parts
When replacing the following part, perform the described check/adjustment.
Note:
Set the assist mode except the “5-8-4. LCD/LED Displays Check” according to need.
When replacing the cover (F) set:
• 5-2. INITIALIZATION OF EEPROM (WRITING OF INITIAL VALUE)
• 5-3. CHARGING VOLTAGE ADJUSTMENT
• 5-4. FULL-CHARGE VOLTAGE/STOP CHARGE VOLTAGE CHECK
• 5-5. HOME POSITION ADJUSTMENT
• 5-6. POWER LEVEL CHECK/ADJUSTMENT
• 5-7. FLAT FLASH INTENSITY CHECK/ADJUSTMENT
• 5-8-4. LCD/LED Displays Check
When replacing the PC board set, D or power case unit:
• 5-3. CHARGING VOLTAGE ADJUSTMENT
• 5-4. FULL-CHARGE VOLTAGE/STOP CHARGE VOLTAGE CHECK
• 5-5. HOME POSITION ADJUSTMENT
• 5-6. POWER LEVEL CHECK/ADJUSTMENT
• 5-7. FLAT FLASH INTENSITY CHECK/ADJUSTMENT
• 5-8-4. LCD/LED Displays Check
When disassembling/assembling the flash:
• 5-5. HOME POSITION ADJUSTMENT
• 5-6. POWER LEVEL CHECK/ADJUSTMENT
• 5-7. FLAT FLASH INTENSITY CHECK/ADJUSTMENT
• 5-8-4. LCD/LED Displays Check
