Sony HT-XT100, Operating Instructions Manual

Page: 11 / 79

11
GB
Set
tings and Adjust
ment
s
Using the setup display
You can set the following items with the menu.
Your settings are retained even if you disconnect the AC power cord (mains lead).
1
Press MENU to turn on the menu on the front panel display.
2
Press BACK/
 
(select)/ENTER repeatedly to select the item and press ENTER
to decide the setting.
3
Press MENU to turn off the menu.
The default settings are underlined.
Settings and Adjustments
Menu list
Menu items Function
[LEVEL]
(Level) [DRC]
(Dynamic range
control) Useful for enjoying movies at low sound volume. DRC
applies to Dolby Digital sources.
• [ON]: Compresses sound in accordance with the
information contained in the content.
• [OFF]: Sound is not compressed.
[TONE]
(Tone) [BASS]
(Bass) Adjusts the bass level.
• The parameters range from [–6] to [+6] in 1-step
increments.
[TRE]
(Treble) Adjusts the treble level.
• The parameters range from [–6] to [+6] in 1-step
increments.
[AUDIO]
(Audio) [DUAL]
(Dual mono) You can enjoy multiplex broadcast sound when the system
receives a Dolby Digital multiplex broadcast signal.
• [M/S]: Main sound is output from the left speaker and sub
sound is output from the right speaker.
• [MAIN]: Outputs only the main channel.
• [SUB]: Outputs only the sub channel.
[TV AU]
(TV audio) • [HDMI]: Select this setting when the system is connected
to an HDMI (ARC) jack of a TV with an HDMI cable.
• [OPT]: Select this setting when the system is connected to
a TV with the optical digital cable.
• [ANALG]: Select this setting when the system is connected
to a TV with an audio cable.
[EFCT]
(Sound effect) • [ON]: The sound of the selected sound field is played. It is
recommended to use this setting.
• [OFF]: The input source is down-mixed for 2 channels.
[STRM]
(Stream) Shows the current audio stream information.
• [LPCM]: L PCM
• [DOLBY D]: Dolby Digital
• [NO INFO]: No audio format information