HT-ST9
45
SECTION 3
TEST MODE
COLD RESET
It can initialize various backup information.
Procedure:
1. Press the [
@
/
1
] button to turn the power on.
2. Press the two buttons of the [VOLUME –] and [
@
/
1
] simultane-
ously for
fi
ve seconds.
3. The
message
“WAIT”
→
“RESET” is displayed on the OLED
display and then turn the power off.
RESET
WAIT
DEMO MODE1
The demo mode1 can be performed.
Procedure:
1. Press the [
@
/
1
] button to turn the power on.
2. Press the two buttons of the [INPUT] and [VOLUME –] si-
multaneously for
fi
ve seconds. Or press the buttons on the re-
mote commander in the order of [BACK]
→
[ ]
→
[INPUT]
→
[
%
]
→
[INPUT]
→
[
%
].
3. The message “DMON” is displayed on the OLED display,
and enter the demo mode, then changed to the setting of initial
value for demo mode1.
DMON
Initial value for demo mode1:
Function
: TV (optical)
Volume
:
32
Muting
:
OFF
Sound
fi
eld
: CLEAR AUDIO+
Night mode
: OFF
Voice
:
Type
1
Subwoofer volume
: 10
A/V SYNC
: OFF
Dual mono
: MAIN
Auto standby
: OFF
Note 1:
When the non-operation and no sound after a predetermined time
is followed, setting will return to the initial value for demo mode.
Auto pairing:
Auto pairing starts when function is changed to BT function.
Bluetooth pairing stop after
fi
ve min automatically, and change to
HOME screen.
Auto power on:
Insert the AC cord, automatically become turn the power on.
Valid key operation:
[INPUT] (unit and remote commander)
[PAIRING] (unit and remote commander)
[/–] (unit)
[
2
+/–] (remote commander)
[MIRRORING] (remote commander)
[
%
] (remote commander)
[SOUND FIELD+] (remote commander)
[CLEAR AUDIO+] (remote commander)
[FOOTBALL] (remote commander)
Note 2:
Key operation other than the above are invalid.
Releasing method:
Perform the “COLD RESET”.
Note 3:
The demo mode does not release by unplug the AC cord.
DEMO MODE2
The demo mode2 can be performed.
Procedure:
1. Press the [
@
/
1
] button to turn the power on.
2. Press the buttons on the remote commander in the order of [
x
]
→
[DISPLAY]
→
[INPUT]
→
[
V
].
3. The message “Vol 32” is displayed on the OLED display, then
changed to setting of initial value for demo mode2.
Initial value for demo mode2:
Function
:
HDMI1
Volume
:
32
Auto standby : OFF
Valid key operation:
[/–] (unit)
[
2
+/–] (remote commander)
[
%
] (remote commander)
[SOUND FIELD+] (remote commander)
[CLEAR AUDIO+] (remote commander)
[FOOTBALL] (remote commander)
Note:
Key operation other than the above are invalid.
Releasing method:
Unplug the AC cord.
PANEL TEST
It can con
fi
rm the lighting of OLED display and LED, operation of
buttons, display of model name, destination and software version.
Procedure:
1. Press the [
@
/
1
] button to turn the power on.
2. Press the buttons on the remote commander in the order of [
x
]
→
[DISPLAY]
→
[
v
]
→
[
V
].
3. LED is lighted up, and repeatedly changes display of OLED
display in order from high-brightness
→
low-brightness
→
lights off.
High-brightness
Low-brightness
Lights off
4. In the state of step 3, press the [INPUT] button on the remote
commander and “K 0” is displayed on the OLED display.
K 0
Each time a button on the unit is pressed, “K 0” value increas-
es. However, once a button is pressed, it is no longer taken into
account.
– Continued on next page –
