Sony HT-RD150, Operating Instructions Manual

Page: 27 / 48

27
Se
t-
U
p
M
e
nu
To adjust the volume of all the speakers at one
time
Press 2 +/– on the remote. Or press /
– on the centre unit.
Setting the speaker level by using
the test tone
1
Press AMP MENU repeatedly until the AMP
menu (page 24) appears in the centre unit
display.
2
Press M / m repeatedly to select “LEVEL”
(level), and press ENTER or
,
.
Example:
3
Press M / m to select “TEST TONE” (test
tone), and press ENTER or , .
4
Press M / m to select “T. TONE ON” (test
tone on).
The speakers emit the test tone in turn.
5
Press < to return to the previous layer,
and then press M / m to select a speaker;
“FL LEVEL” (front left speaker level)
“CEN LEVEL” (centre speaker level)
“FR LEVEL” (front right speaker level)
“SR LEVEL” (surround right speaker level)
“SL LEVEL” (surround left speaker level)
“SW LEVEL” (subwoofer level)
6
Press ENTER or , .
The selected speaker emits the test tone.
7
From your listening position, adjust the
speaker level by pressing
M / m .
Check the status in the centre unit display.
Example: When outputting a test tone of –4
dB from the front left speaker.
8
Repeat steps 5 to 7 to adjust the other
speaker levels.
9
When you finish adjusting levels, press <
to return to the previous layer.
10
Press M / m to select “TEST TONE,” and
press ENTER or , .
11
Press
M
/
m
to select “T. TONE OFF” (test
tone off), and press AMP MENU to turn off
the AMP menu.
To return to the previous layer
Press < .
To operate the connected component after
setting
Select the component (input source) by pressing
DVD, VIDEO, or TUNER/BAND after turning
off the AMP menu.
Note
When you adjust the speaker settings, the sound
momentarily cuts off.
dB
L