Sony HT-NT5, Service Manual

Page: 31 / 74

HT-NT5
31
7. Each time the [CLEAR AUDIO+] button on the remote com-
mander is pressed, VACS on/off setting is changed.
VAON
VAOFF
Releasing method:
Touch the [
1
] button, the message “WAIT” → “RESET” →
“HELLO” is displayed on the front panel display and then turn
the power off.
ACCELERATION SENSOR TEST
It can measurement the installation state (Base or Wall) of the main
unit by the acceleration sensor.
Procedure:
1. Touch the [
1
] button to turn the power on.
2. Press the buttons on the remote commander in the order of [
x
]
→ [DISPLAY] → [
m
] → [
V
].
3. The message “ANG. T” is displayed on the front panel display
and enter the acceleration sensor test mode, and after a few
seconds, change to the installation state (Base or Wall) mea-
surement screen.
B : Base
W : Wall
Angle: 0 to 180
B 0
ANG. T
(Displayed characters/values in the above fi gure are example)
4. By tilting the main unit, information that is displayed will be
updated.
Releasing method:
Touch the [
1
] button and return to the normal mode.
WIRELESS SOUND COLD RESET
It can initialize various backup information of Subwoofer (SA-
WNT5).
Preparation:
Connect the Subwoofer (SA-WNT5) and the Bar Speaker (SA-
NT5) by wireless.
Note: Refer to “WIRELESS CONNECTION (LINK) WORK OF BAR
SPEAKER AND SUBWOOFER”on page 7 for details of wireless
connection.
Procedure:
1. Touch the [
1
] button to turn the power on.
2. Press the buttons on the remote commander in the order of [
x
]
→ [DISPLAY] → [BACK] → [
V
].
3. The power indicator on the Subwoofer (SA-WNT5) turns fol-
lowing fi gure.
Power indicator
Green (light up)
t
Light off
t
Green (light up)
4. Press the [
1
] button on the Subwoofer (SA-WNT5) to check
that the power indicator does not light off.
Note: If the power indicator is light off, reset is not executing.
5. Unplug the AC cord on the Subwoofer (SA-WNT5) from an
outlet and insert the AC cord again.