Sony HT-M3, Operating Instructions Manual

Page: 39 / 128

39 US
T
u
n
e
r Op
era
tio
ns
3
Press the numeric buttons to
enter the frequency.
Example 1: FM 102.50 MHz
Select 1
b
0
b
2
b
5 (
b
0*)
Example 2: AM 1,350 kHz
Select 1
b
3
b
5
b
0
* You do need to press 0 for USA model.
Tip
Adjust the direction of the AM loop antenna
(aerial) for optimum reception upon tuning to
an AM station.
4
Press ENTER.
If you cannot tune to a station
“–––.––MHz” or “––––kHz” appears and
then the display panel returns to the current
frequency.
Make sure you have entered the right
frequency. Try repeating steps 2 to 4. If you
still cannot tune to a station, the frequency
may not be in use in your area.
(USA, Latin America, Argentina
and Mexico models only)
You can change the AM tuning scale to either
9 kHz or 10 kHz.
1
Press TUNER repeatedly (or
press AM) to select AM.
2
Press AMP MENU.
3
Press V / v repeatedly to select
“TUNER”, then press or b .
4
Press V / v repeatedly to select
“AM STEP”, then press or b .
5
Press V / v repeatedly to select
the AM tuning scale you want.
Note
All AM preset stations will be erased when you
change the tuning scale.
Presetting FM/AM radio
stations
You can store up to 30 FM and 30 AM stations
as your favorite stations as preset stations.
1)
RM-AAU135 only.
2)
RM-AAU136 only.
1
Press TUNER repeatedly (or
press FM or AM) to select the
FM or AM band.
You can also use INPUT SELECTOR on
the receiver.
2
Tune to the station that you
want to preset using Automatic
Tuning (page 38) or Direct
Tuning (page 38).
Changing the AM tuning scale
PRESET
+/–
Numeric
buttons
ENTER
AMP
MENU
,
V
/
v
/
B
/
b
MEMORY
AM
2)
TUNER
1)
/
FM
2)
continued