Sony HT-M3, Operating Instructions Manual

Page: 38 / 128

38 US
Listening to FM/AM radio
You can listen to FM and AM broadcasts
through the built-in tuner. Before operation,
make sure you have connected the FM and
AM antennas (aerials) to the receiver (page
29).
Tip
The tuning scale for direct tuning is shown below.
* The AM tuning scale can be changed (page 39).
1)
RM-AAU135 only.
2)
RM-AAU136 only.
1
Press TUNER repeatedly (or
press FM or AM) to select the
FM or AM band.
You can also use INPUT SELECTOR on
the receiver.
2
Press or TUNING –.
scans from lower to higher
frequency stations and TUNING – for
scanning higher to lower.
The receiver stops scanning whenever a
station is received.
In case of poor FM stereo
reception
If the FM stereo reception is poor and “ST”
flashes on the display panel, select monaural
audio to lessen the sound distortion.
Press FM MODE repeatedly to select
“MONO”.
To return to stereo mode, press FM MODE
repeatedly to select “STEREO”.
You can enter the frequency of a station
directly by using the numeric buttons.
1
Press TUNER repeatedly (or
press FM or AM) to select the
FM or AM band.
You can also use INPUT SELECTOR on
the receiver.
2
Press D.TUNING.
Tuner Operations
Area FM AM
USA 100 kHz 10 kHz
*
Latin America, Argentina
and Mexico 50 kHz 10 kHz
*
Australia, South Africa,
Middle East, India, Thailand,
Singapore and Europe 50 kHz 9 kHz
TUNING
+/–
ENTER
Numeric
buttons
D.TUNING
AMP
MENU
,
V / v / B / b
AM
2)
FM MODE
TUNER
1)
/
FM
2)
Tuning to a station
automatically (Automatic
Tuning)
Tuning to a station directly
(Direct Tuning)