Sony HT-M22 Page 55 Operating Instructions Manual Download | Manualshive

Page: 55 / 68

background image

55

GB

A

ddit

ion
al

In

fo
rm

atio

n

When the receiver is in standby mode,
there is no sound output from the TV.

• When the receiver enters into standby

mode, sound is from the last HDMI
equipment selection before you turned
off the receiver. If you are enjoying
other equipment, play the equipment
and perform the One-Touch Play
operation, or turn on the receiver to
select the HDMI equipment you want
to enjoy.

• Make sure “PASS THRU” is set to

“ON” in the HDMI settings menu if
you connect equipment not compatible
with the “BRAVIA” Sync to the
receiver (page 47).

The FM reception is poor.

• Use a 75-ohm coaxial cable (not

supplied) to connect the receiver to an
outdoor FM antennas (aerial) as shown
below.

Radio stations cannot be tuned in.

• Check that the antennas (aerials) are

connected securely. Adjust the
antennas (aerials) and connect an
external antenna (aerial), if necessary.

• No stations have been preset or the

preset stations have been cleared
(when tuning by scanning preset
stations is used). Preset the stations
(page 31).

• Press DISPLAY repeatedly on the

remote control so that the frequency
appears on the display panel.

Are you using a supported USB
device?

• If you connect an unsupported USB

device, the following problems may
occur. See “Compatible USB devices”
(page 27) for the supported device
types.
– The USB device is not recognized.
– File or folder names are not

displayed on this receiver.

– Playback is not possible.
– The sound skips.
– There is noise.
– A distorted sound is output.

There is noise, skipping, or distorted
sound.

• Turn off the receiver and reconnect the

USB device, then turn on the receiver.

• The music data itself contains noise, or

the sound is distorted.

The USB device is not recognized.

• Turn off the receiver, then disconnect

the USB device. Turn on the receiver
again and reconnect the USB device.

• Connect the supported USB device

• The USB device does not work

properly. Refer to the USB device
operating instructions on how to deal
with this problem.

Playback does not start.

• Turn off the receiver and reconnect the

USB device, then turn on the receiver.

• Connect the supported USB device

• Press

NX

to start playback.

Tuner

Receiver

Outdoor FM antenna (aerial)

USB device

«
...
53
54
55
56
57
...
»

Summary of Contents for HT-M22





































































Reviews:

No comments

Related manuals for HT-M22

Brand: Zip Pages: 16

Brand: Reflex Pages: 26

OPTIUTA10B Optidrive Series

Brand: Lanzar Pages: 8

970114-0403 - X 530 5.1-CH PC Multimedia Home Theater Speaker Sys

Brand: Logitech Pages: 10

Weymouth Series

Brand: Hamworthy Pages: 28

Brand: WaterGroup Pages: 24

Brand: Supersonic Pages: 6

Quad-MC EV9628-28

Brand: Everpure Pages: 2

Brand: 1byone Pages: 25

Brand: TDK Pages: 9

Harman BAR 1000

Brand: JBL Pages: 27

Brand: Acuva Pages: 76

Brand: RCA Pages: 20

Brand: Kenwood Pages: 40

Brand: Kenwood Pages: 40

Brand: Kenwood Pages: 64

Brand: Kenwood Pages: 64

Brand: Kenwood Pages: 64

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands