masterpage:Left
lename[E:\SEM_Janet\DATA_DDW970\J9050954_2549734911DDW970AU\2549734911\GB09
ADD_HT-DDW970-AU.fm]
52
GB
model name1[HT-DDW970]
[2-549-734-
91
(1)]
If you are unable to remedy the
problem using the
troubleshooting guide
Clearing the receiver’s memory may remedy the
problem (page 17). However, note that all
memorized settings will be reset to their factory
settings and you will have to readjust all settings
on the receiver.
If the problem persist
Consult your nearest Sony dealer.
Reference sections for clearing
the receiver’s memory
Amplifier section
Power Output
1)
(6 ohms 120 Hz – 20 kHz, THD 0.09%)
FRONT
2)
: 50
W/ch
CENTER
2)
: 50
W
SURR
2)
: 50
W/ch
SURR BACK
2)
: 50
W
(6 ohms 1 kHz, THD 0.7%)
FRONT
2)
: 60
W/ch
CENTER
2)
: 60
W
SURR
2)
: 60
W/ch
SURR BACK
2)
: 60
W
(6 ohms 1 kHz, THD 10%)
FRONT
2)
: 100
W/ch
CENTER
2)
: 100
W
SURR
2)
: 100
W/ch
SURR BACK
2)
: 100
W
1) Measured under the following conditions:
240 V AC, 50 Hz
2) Depending on the sound field settings and the
source, there may be no sound output.
Inputs (Analog)
Inputs (Digital)
Outputs (Analog)
Reproduction frequency range:
28 – 20,000 Hz
Tone
To clear
See
All memorized settings
Customized sound fields
Specifications
MULTI CH IN,
SA-CD/CD, MD/TAPE,
DVD, VIDEO 1, 2, 3
Sensitivity: 800 mV
Impedance: 50 k ohms
DVD (Coaxial)
Sensitivity: –
Impedance: 75 ohms
VIDEO 2, SA-CD/CD
(Optical)
Sensitivity: –
Impedance: –
MD/TAPE (OUT),
VIDEO 1 (AUDIO OUT)
Voltage: 800 mV
Impedance: 10 k ohms
SUB WOOFER
Voltage: 2 V
Impedance: 1 k ohm
Gain levels
±6 dB, 1 dB step
GB01COV_HT-DDW970-AU.book Page 52 Wednesday, June 8, 2005 7:08 PM
