Sony HDW-D2000 Operation Manual Download Page 143

Page: 143 / 147

Appendix

A-7

HD/SD video output phase settings

For the HD/SD video output phase setting, you can
use the maintenance menu.

For details, refer to the Installation Manual.

Note

The SD SDI (D1) output and component/composite
outputs have the same phase.

For details of the audio/timecode output phase, see Setup
menu item 338.

Item number Item name

Settings

M3A:
OUTPUT
PHASE
SELECT

M3A0:
HD PHASE
SEL

Select the HD video output signal phase with respect to the reference signal: 0H
or –90H (HD) advanced.

0H :

Output in sync with the reference signal.

–90H:

Output with the phase delayed by –90H (HD) with respect to the reference

signal.

M3A1:
SD PHASE
SEL

Select the SD video output signal phase with respect to the reference signal: 0H
or –2H (SD) advanced.

0H :

Output in sync with the reference signal.

–2H:

Output with the phase delayed by –2H (SD) with respect to the reference

signal.

M3A2:
SD UPCNV
SEL

Select whether the SD video output signal phase in SD tape playback should be
in sync or one frame delayed.

Noml :

Output the SD video with the phase unchanged. (The HD video output is

delayed by one frame with respect to the reference signal.)

HD:

Output the SD video with the phase delayed by one frame. (The HD video

output and SD video output are in sync with the reference signal.)

Summary of Contents for HDW-D2000




















































































































































Search results

Summary of Contents for HDW-D2000

Reviews:

Related manuals for HDW-D2000

Brands by name

Popular brands

Sony HDW-D2000, Operation Manual

Search results

Summary of Contents for HDW-D2000

Reviews:

Related manuals for HDW-D2000

Brands by name

Popular brands