1-5.
Coaxial Cable
1-5-1.
Disconnecting/Connecting Fine-Wire Coaxial Cable
Note
• Be very careful when handling the fine-wire coaxial cable so that fine wires are not disconnected.
• When disconnecting the fine-wire coaxial cable, be sure to hold the connector. Do not attempt to pull the cable.
• Check that the contact surface of the fine-wire coaxial cable connector is free from dirt or dust.
Disconnecting
I PX
Hold the connector to disconnect.
OK
Do not attempt to disconnect by
pulling the cable.
NG
Fine-wire coaxial cable
Connector
Polarity marks
1.
Hold both sides of the fine-wire coaxial cable connector, and pull the connector straight to disconnect it.
Connecting
I PX
Fine-wire coaxial cable
Connector
Polarity marks
Note
Firmly insert the connector straight as far as it will go.
1.
Insert the connector straight matching the polarity marks.
1-5-2.
Disconnecting/Connecting Coaxial Cable
Note
Be sure to observe the disconnecting and connecting procedures below to prevent wire disconnection or poor contact.
Required Tool
• Connector remover (Part No: J-7121-210-A)
HDVF-L750/HDVF-L770
1-8
