Adjusting the Viewfinder Position
38
3
Holding the handles, move the viewfinder to the
desired height and position.
• The maximum adjustment ranges above are allowed
when the viewfinder is positioned near the camera
operator. To adjust the front-back position of the
mounting wedge or plates, see “Adjusting the Front-
Back Position” on page 38.
• Depending on the shape of the connected camera,
panning of the viewfinder may hinder use of the
camera’s handle. If the position of the camera’s handle
is fixed, adjust the position of the mounting wedge and/
or plates. (See page 38).
4
Turn the tilt-lock knob and lift-lock knob in the
direction of the arrow indicated on each knob
(toward the lock position) to secure the position of
the viewfinder.
Adjusting the Front-Back Position
You can adjust the front-back position of the viewfinder
by sliding or rotating the mounting position of the
mounting wedge and upper and lower plates at the bottom
of the viewfinder.
1
Holding the viewfinder firmly, remove the seven
screws from the mounting wedge and the lower
plate.
Notes
10 cm
(4 inches)
Height adjustment
Maximum adjustment range: 10 cm (4 inches)
Tilting adjustment
Panning adjustment
Maximum adjustment range: 90° upward/downward
Bottom
Mounting wedge
Lower plate
Upper plate
Rotates to right and
left.
