40
When the CH1 switch is set to
INT MIC
When the CH1 is set to INPUT1
2
Set the INPUT1 switch
B
to an
appropriate position for the microphone
connected to the INPUT1 jack
A
.
LINE: For inputting sound from an
audio device
MIC: For inputting sound from an
external microphone that does
not support the +48V power
source.
MIC+48V:For inputting sound from a
device that supports the +48V
power source.
When you connect a microphone to the
INPUT2 jack, set the INPUT2 switch to
an appropriate position for that
microphone.
b
Notes
• Do not operate the INPUT1/INPUT2 switches
during recording to prevent noise from being
recorded.
• When you connect a device that supports the
+48V power source to the INPUT1 or INPUT2
jack, set the INPUT1/INPUT2 switches to MIC
prior to connecting the device. When you
disconnect the device, set the INPUT1/INPUT2
switch to MIC first, then disconnect it.
• When you connect a microphone that does not
support the +48V power source to the INPUT1
or INPUT2 jack, set the INPUT1/INPUT2
switch to MIC. If you use it with the INPUT1/
INPUT2 switch set to MIC+48V, it may be
damaged or the recorded sound may be
distorted.
You can adjust the volume of an internal
microphone or a microphone connected to
the INPUT1/INPUT2 jacks.
z
Tips
• See page 39 on the CH1 (INT MIC/INPUT1)
and the CH2 (INT MIC/INPUT1/INPUT2)
switches.
1
Set the AUTO/MAN (CH1/CH2) switch
E
of the channel to be adjusted to
MAN.
appears on the screen.
2
Turn the AUDIO LEVEL dial
F
to
adjust the volume during recording or
standby.
CH2 switch
position
Input channel and source
INT MIC
Internal
microphone
(L)
CH1
Internal
microphone
(R)
CH2
*
INPUT1
Internal
microphone
(mono)
CH1
XLR INPUT1
CH2
**
INPUT2
Internal
microphone
(mono)
CH1
XLR INPUT2
CH2
**
CH2 switch
position
Input channel and source
INT MIC
XLR INPUT1
CH1
Internal
microphone
(mono)
CH2
**
INPUT1
XLR INPUT1
CH1
CH2
**
INPUT2
XLR INPUT1
CH1
XLR INPUT2
CH2
**
*
The recording level of channel 2 is
synchronized with that of channel 1 when only
the internal microphone is used. The recording
level of channel 2 is controlled with the CH1
(AUDIO LEVEL) dial and the CH1 (AUTO/
MAN) switch.
**
You can adjust the recording levels of channel 1
and channel 2 separately.
Adjusting the volume
Changing the settings of your camcorder recordings (Continued)