TV
HDMI
Projector
SRW-5100 with HKSR-5105
HDV device
i.LINK
HDV Stream Out
NLE
SRW-5100 with HKSR-5105
11
HDMI Output
The SRW-5100 can output materials in 4:4:4/1080i*
1
and
4:2:2/1080p*
1
,1080i, or 720p formats via its HDMI*
2
port. This
allows users to instantly view the HDCAM-SR contents in their
native signal format on a wide range of displays such as
televisions and projectors. This capability enables the SRW-5100
player to be used at exhibitions and conferences for simple
viewings, screenings, and presentations.
*1: Requires the optional HKSR-5103 board.
*2: Requires the optional HKSR-5105 board.
SRW-5100: HKSR-5105 HDMI Output
HDV1080i Output
The SRW-5100 can output a 25 Mbps HDV1080i stream (MPEG-2
TS) to HDV products or HDV-based nonlinear editors via its i.LINK™
port*
1
. It supports 59.94i/50i output, and 23.98PsF materials are
output as 1080/59.94i signals via 2-3 pull-down conversion. 1080p
and 720p materials can also be output as 1080i signals. This
capability is useful for offline editing.
*1: Requires the optional HKSR-5105 board. i.LINK is a Sony trademark used only to
designate that a product is equipped with an IEEE1394 connector. Not all
products with an i.LINK connector may communicate with each other. Please
refer to the documentation that comes with any device having an i.LINK
connector for information on compatibility, operating conditions, and proper
connection. .
SRW-5100: HKSR-5105 i.LINK Output
Operational Features
HKSR-5105 Format Conversion Capability
PLAYBACK Tape Format
HDV Output
HDMI Output
HDCAM-SR
1080/4:4:4*
1
(SQ/HQ)
23.98PsF
1080/4:2:2/59.94i
1080/4:4:4/23.98PsF
1080/4:2:2/59.94i
24PsF
–
1080/4:4:4/24PsF
1080/4:2:2/60i
25PsF
1080/4:2:2/50i
1080/4:4:4/25PsF
1080/4:2:2/50i
29.97PsF
1080/4:2:2/59.94i
1080/4:4:4/29.97PsF
1080/4:2:2/59.94i
30PsF
–
1080/4:4:4/30PsF
1080/4:2:2/60i
50i
1080/4:2:2/50i
1080/4:4:4/50i
1080/4:2:2/50i
59.94i
1080/4:2:2/59.94i
1080/4:4:4/59.94i
1080/4:2:2/59.94i
60i
–
1080/4:4:4/60i
1080/4:2:2/60i
1080/4:2:2*
1
50p
1080/4:2:2/50i
1080/4:2:2/50p
59.94p
1080/4:2:2/59.94i
1080/4:2:2/59.94p
60p
–
1080/4:2:2/60p
1080/4:2:2/60i
720/4:2:2
50p
1080/4:2:2/50i
720/4:2:2/50p
1080/4:2:2/50i
59.94p
1080/4:2:2/59.94i
720/4:2:2/59.94p
1080/4:2:2/59.94i
HDCAM-SR
or
HDCAM*
2
1080/4:2:2*
2
23.98PsF
1080/4:2:2/59.94i
1080/4:2:2/23.98PsF
1080/4:2:2/59.94i
24PsF
–
1080/4:2:2/24PsF
1080/4:2:2/60i
25PsF
1080/4:2:2/50i
1080/4:2:2/25PsF
1080/4:2:2/50i
29.97PsF
1080/4:2:2/59.94i
1080/4:2:2/29.97PsF
1080/4:2:2/59.94i
30PsF
–
1080/4:2:2/30PsF
1080/4:2:2/60i
50i
1080/4:2:2/50i
1080/4:2:2/50i
59.94i
1080/4:2:2/59.94i
1080/4:2:2/59.94i
60i
–
1080/4:2:2/60i
LETTER BOX mode
HD to SD, 16:9 HD picture down-converted to SD and
output is presented in Letter-box on a 4:3 monitor.
SD to HD, 4:3 SD picture is cropped and presented as
a 16:9 picture.
SQUEEZE mode
HD to SD, 16:9 HD picture is down-converted and
output as a 4:3 SD picture.
SD to HD, 4:3 SD picture is up-converted, then output
as a 16:9 HD picture.
HD to SD, edges of a 16:9 HD picture are cropped in
the down-converted 4:3 SD picture.
SD to HD, 4:3 SD picture up-converted as a 16:9 HD
picture, however the sides are cropped.
EDGE CROP mode
Selectable Picture Modes
Three modes of operation – SQUEEZE, LETTER BOX, and EDGE CROP – are available to provide the correct presentation for each application type.
The HKSR-5105 does not support output of 2K (2048 x 1080, 2048 x 1556) mode.
*1: Requires optional HKSR-5103 Advanced Processor Board.
*2: Requires optional HKSR-5802 Digital BETACAM and HDCAM Processor Board.
