Sony HDCAM HDW-F900, Operation Manual

Page: 211 / 253

Chapter 6 Maintenance
6
6-2
• •
•
•
•
• •
•
•
•
• • •
•
•
•
• •
•
•
•
•
Condensation
If you move the camcorder from a very cold place to a warm place, or
use it in a damp location, condensation may form on the head drum.
Then, if the camcorder is operated in this state, the tape may adhere to
the drum and cause a failure or even permanent damage. Do the
following to prevent this from happening.
• When moving the camcorder from a cold place to a warm place, be
sure no cassette is loaded in the camcorder.
• Whenever you turn on the power, check that the HUMID indicator
does not appear. If it appears, wait until it disappears before loading a
cassette.
For more information, see Section 3-1-1 “Loading and Unloading a Cassette”
(page 3-1) and Section 6-3 “Operation Warnings” (page 6-14).
6-1-2 Testing the Camera
Set the switches and selectors as follows.
Iris: Automatic
WHITE BAL: A or B
OUTPUT/DCC: BARS
GAIN: Set as low as possible.
VTR SAVE/STBY: SAVE
Zoom:
SERVO/MAN