manualshive.com logo in svg

Sony HDCAM HDW-F900, Operation Manual

Share
Download
Sony HDCAM HDW-F900 Operation Manual Download Page 14

1

Chapter 1  Overview

1-5

• The built-in time code generator can be synchronized with an external

generator.

• A lithium battery is the back-up power supply for the built-in time code

generator enabling the time code to be held for approximately 5 years
without charging the camcorder power supply.

• Optional long-life battery packs are available.
• Pressing the VTR START button on the camcorder or the VTR button

on the lens ensures recording continuity from the very next frame.

• Two analog audio input channels and the microphone can be recorded

at the same time.

• Connecting the HDCA-901 camera adaptor (not supplied) allows you

to input four audio input channels. Also, the HD-SDI signal can be
output.

Summary of Contents for HDCAM HDW-F900






























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands