Sony HCD-ZX70DVD, Service Manual, Page: 16 / 136

16
5 stocker
section
1 three screws
(BVTP M2.6)
2 chassis (mold B) section
3 gear (eject)
4 two step screws
4 two step
screws
6 two screws
(PTPWH M2.6)
7 slider (selection)
8 washer
9 compression
spring
Pully (LD)
Note: Rotating the pully (LD),
shift the slider (selection)
to the left.
TRAY (SUB)
CHASSIS (MOLD B) SECTION, STOCKER SECTION AND SLIDER (SELECTION)
A
B
pully (LD)
stocker section
tray (sub)
slider (selection)
pully (mode)
1 Rotating the pulley (LD), shift the slider (selection) in the arrow A direction.
2
Rotating the pulley (mode) in the arrow direction, adjust the tray (sub) to be removed.
3 Rotating the pulley (LD), shift the slider (selection) in the arrow B direction.
4 Rotating the pulley (mode) in the arrow direction, remove the tray (sub) to be removed.