background image

SERVICE MANUAL

Amplifier section

AUDIO POWER SPECIFICATIONS:
(U.S.A. model only)

POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
with 8 ohm loads both channels driven, from 120-
10,000 Hz; rates 90 watts per channel minimum RMS
power, with no more than 10% total harmonic
distortion from 250 milliwatts to rated output.

Total harmonics distortion

Less than 0.07%
(8 ohms at 1 kHz, 50 W)

Center Speaker:

Continuous RMS power output

40 watts
(8 ohms at 1 kHz,
10% THD)

Rear Speaker:

Continuous RMS power output

40 + 40 watts
(8 ohms at 1 kHz,
10% THD)

Canadian model:

Front Speaker:

Continuous RMS power output

100 + 100 watts
(8 ohms at 1 kHz,
10% THD)

Total harmonics distortion

Less than 0.07%
(8 ohms at 1 kHz, 50 W)

Center Speaker:

Continuous RMS power output

40 watts
(8 ohms at 1 kHz,
10% THD)

Rear Speaker:

Continuous RMS power output

40 + 40 watts
(8 ohms at 1 kHz,
10% THD)

European model:

Front Speaker:

DIN power output (rated) 80 + 80 watts

(8 ohms at 1 kHz, DIN)

Continuous RMS power output (reference)

100 + 100 watts
(8 ohms at 1 kHz,
10% THD)

Music power output (reference)

170 + 170 watts
(8 ohms at 1 kHz,
10% THD)

Center Speaker:

DIN power output (rated) 30 watts

(8 ohms at 1 kHz, DIN)

Continuous RMS power output (reference)

40 watts
(8 ohms at 1 kHz,
10% THD)

Music power output (reference)

60 watts
(8 ohms at 1 kHz,
10% THD)

COMPACT DISC DECK RECEIVER

SPECIFICATIONS

HCD-ZX70DVD

US Model

Canadian Model

AEP Model

UK Model

E Model

Australian Model

Chinese Model

HCD-ZX70DVD is the Amplifier, DVD/CD
player, Tape Deck and Tuner section in
MHC-ZX70DVD.

– Continued on next page –

Model Name Using Similar Mechanism

NEW

DVD

DVD Mechanism Type

CDM53J-DVBU1

Section

Base Unit Name

DVBU1

Optical Pick-up Name

KHM-220AAA

TAPE

Model Name Using Similar Mechanism

HCD-ZX30AV

Section

Tape Transport Mechanism Type

TCM-230AWR12

This stereo system is equipped with the Dolby B-type noise
reduction system*.
* Manufactured under license from Dolby Laboratories

Licensing Corporation.
DOLBY and the double-D symbol 

;

 are trademarks of

Dolby Laboratories Licensing Corporation.

This system incorporates Dolby* Digital and Pro Logic
Surround.
* Manufactured under license from Dolby Laboratories.

“Dolby”, “AC-3”, “Pro Logic” and the double-D symbol 

;

are trademarks of Dolby Laboratories.
Confidential unpublished Works. © 1992-1997 Dolby
Laboratories, Inc. All rights reserved.

9-929-264-15

Sony Corporation

2004I05-1

Audio Group

© 2004.09

Published by Sony Engineering Corporation

Ver 1.4  2004.09

Summary of Contents for HCD-ZX70DVD









































































































































Reviews: