![background image](http://html.mh-extra.com/html/sony/hcd-zx66i-cd-receiver-component-for-compact-hi-fi-stereo-system/hcd-zx66i-cd-receiver-component-for-compact-hi-fi-stereo-system_service-manual_1329792026.webp)
HCD-ZX66i/ZX99i
26
[CD AGING MODE]
• This mode can be used for operation check of CD section.
If an error occurs, the aging operation would stops and the sta-
tus is displayed.
If there were no error occurs, the aging operation would con-
tinue repeatedly.
Procedure:
1. Press
[
? / 1
] button to turn the set ON.
2. Select CD function.
3. Load 5 discs on the disc tray.
4. Press [PLAY MODE] button repeatedly to select the “ALL
DISCS” mode, and press the [REPEAT] button on the remote
repeatedly to select repeat mode off.
5. Press [
M
] (iPod) button, [TUNING MODE] button and
[DISC 4] button simultaneously.
6. Aging operation is started.
7. To release from this mode, press [
? / 1
] button or disconnect
the power cord to turn the power OFF.
Aging mode sequence:
START
(from Disc 1)
TOC Reading
Play first track for 2
seconds
Play last track for 2
seconds
EX-CHANGE open/
close
Open the disc tray
Disc skip
Close the disc tray
Change the next disc
Disc Chucking
[CD ERROR CODE MODE]
1. Display the CD error code when an error occurred
Procedure:
1. Press [
M
] (iPod) button, [TUNING MODE] button and
[DISC SKIP] button simultaneously to enter the error code
display mode.
2. The
fl uorescent indicator tube displays the number of total er-
ror.
3. Each time CD buttons is pressed, display change as below.
Display of
Total Error
FR button
FF button
Display of
Mechanical
Errors
AMS (+)
button
FR button
FF button
AMS (–)
button
Display of
No Disc
Errors
AMS (+)
button
AMS (–)
button
4. To clear the error record, operate the cold reset. (Refer to the
“MC COLD RESET”)
5. To release from this mode, press the [
? / 1
] button or discon-
nect the power plug to turn the power OFF.
2. Display of total error
Em**Ed**
Em**: The number of times for CDM (mechanical) errors.
Ed**: The number of times for BD error (after chucking the
disc).
• Display of CDM (mechanical) errors. It is show with “M” and
11 digit number.
M*$$%%&&##00
M*: The number of history error for mechanical (“0” is latest
one)
(Press [
>
] (CD) button to display next error)
$$: Not used
%%: Loading related error (Second fi gure is not used)
D: Stop by the problem other than mechanical problem
while closing.
E: Stop by the problem other than mechanical problem
while opening.
C: Stop by the problem other than mechanical problem
while chucking up.
F: Stop by the problem other than mechanical problem
while chucking down.