![background image](http://html.mh-extra.com/html/sony/hcd-zx50md/hcd-zx50md_service-manual_1329790029.webp)
29
2. Correction of Errors
[When due to tape deck]
Stopped while tape aging operation with the ”” displayed state.
[When due to CD]
Press
x
, DISPLAY , and CD
Z
together to display the error code.
• Display of number of mechanism errors
Move the stick to the left and right to display “CDM Err Count *”.
* is the number of mechanism errors.
• Display of mechanism error
Move the stick to the left and right to display “CDM E**D##$$%%!!”.
Move the stick up and down to send the error number.
**
: Error number 00 is the latest error.
The larger the number, the older will the error be. (Maximum 9)
##
: FF is the mechanism error after mechanism initialization ends.
$$
: Judge from the first digit of the error number. (Don’t care the second digit.)
When the error number is 1 or 2, it indicates mechanism error in tray loading between the stocker position and behind it.
%% : Judge from the first digit of the error number. (Don’t care the second digit.)
When the error number is 2, it indicates mechanism error in the up/down movements of the stocker.
!!
: Judge from the first digit of the error number. (Don’t care the second digit.)
When the error number is 2, it indicates mechanism error during switching of the clamper and mode.
• No DISC error display
Move the stick left and right to display “No Disc Count *”.
* means the number of no discs.
• No DISC error display
Move the stick left and right to display “No E**D##$$%%00”.
Move the stick up and down to send the error number.
**
: Error number 01 is the latest error.
The larger the number, the older will the error be. (Maximum 3)
##
: 01 .... FOCUS ERROR
02 .... GFS ERROR
03 .... SET UP ERROR
$$
: 00 .... Judged as No DISC without attempting chucking retry
02 .... Judged as No DISC after chucking retry
%% : Judged with the first digit of the error number in the state where No DISC has been determined.
(Don’t care the second digit.)
1 ...... STOP
2 ...... SET UP
3 ...... TOC Read
4 ...... Access
5 ...... PLAY
6 ...... PAUSE
7 ...... Manual Search (during PLAY)
8 ...... Manual Search (during PAUSE)
3. Ending the Aging Mode
1) End the Aging Mode with the power off.
2) To reset the CD error history, be sure to perform cold reset.
Summary of Contents for HCD-ZX50MD
