![background image](http://html.mh-extra.com/html/sony/hcd-vp100/hcd-vp100_service-manual_420900012.webp)
HCD-VP100
12
SECTION 3
TEST MODE
Start
REC pause for 3 seconds
REC pause for 3 seconds
REV REC
Rewind
FWD Play
Shut off
Shut off
1 minute
1 minute
3 minutes
Start
Open the disc tray
Close the disc tray
Play the last track
[Cold Reset]
• The cold reset clears all data including preset data stored in the
RAM to initial conditions. Execute this mode when returning
the set to the customer.
Procedure:
1. Turn ON the power.
2. Press three buttons
x
(TAPE),
x
(CD), and
[BAND]
simultaneously.
3. The set is reset.
[Liquid Crystal Display All Lit Check Mode]
Procedure:
1.
Set to standby state.
2.
Press three buttons of
x
(TAPE),
x
(CD), and
[TUNING MODE]
simultaneously.
3.
Liquid crystal display are all turned on.
4.
To exit from this mode, press the
I/
1
button to turn the power
OFF.
[Tape Deck Aging Mode]
This mode can be used for operation check of tape deck section.
Procedure:
1.
Set a tape in the tape deck.
2.
Set to standby state.
3.
Press three buttons of
x
(TAPE),
x
(CD), and
[]
simultaneously.
4.
The aging is executed in bellow sequence.
5.
To exit from the aging mode, press the
I/
1
button to turn the
power OFF.
Aging mode sequence:
[CD Aging Mode]
This mode can be used for operation check of CD section.
Procedure:
1.
Load a CD disc.
2.
Set to standby state.
3.
Press three buttons of
x
(TAPE),
x
(CD), and
[TUNING --]
simultaneously.
4.
The aging is executed in bellow sequence.
5.
To exit from the aging mode, press the
I/
1
button to turn the
power OFF.
Aging mode sequence:
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299