background image

SERVICE MANUAL

Sony Home Entertainment &

 Sound Products Inc.

SPECIFICATIONS

COMPACT DISC RECEIVER

9-896-163-04

2020B33-1

© 

2020.02

Canadian Model

E Model

Russian Model

HCD-SX7

AEP Model

UK Model

HCD-SX7/SX7B

Australian Model

HCD-SX7B

Ver. 1.3  2020.02

Model Name Using Similar Mechanism

HCD-SBT100/SBT100B

CD Mechanism Type

CDM90-DVBU204

Optical Pick-up Block Name

CMS-S76RFS7G1 or 
CMS-S76RFS7GP

Note:

Be sure to keep your PC used for service and 
checking of this unit always updated with the 
latest version of your anti-virus software.
In case a virus aff ected unit was found during 
service, contact your Service Headquarters. 

HCD-SX7/SX7B

Photo: HCD-SX7B

•  HCD-SX7 is the compact disc receiver in CMT-SX7.
•  HCD-SX7B is the compact disc receiver in CMT-SX7B.

Amplifier section

Power output (rated): 

30 watts + 30 watts (at 6 ohms, 1 kHz, 1% 
THD) (Except Canadian model)
40 watts + 40 watts (at 6 ohms, 1 kHz, 1% 
THD) (Canadian model)

RMS power output (reference): 

50 watts + 50 watts (per channel at 6 ohms, 
1 kHz)

Inputs/Outputs

LINE IN (external input) jack:

Sensitivity: 2 V
Impedance: 47 kilo ohms

OPTICAL IN (optical digital input) jack

 (headphone) jack:

Stereo mini jack, 8 ohms or more

Section for USB port

 (USB FRONT) port

You can connect a USB flash drive, 
Walkman®, or iPhone/iPad/iPod that is 
compatible with this system.

Transfer speed

High-speed

Supported USB device

Mass Storage Class (MSC)

Maximum output current

2.1 A MAX

 (USB REAR) port

You can connect a compatible device such 
as a PC, etc., to this unit using a USB cable 
(not supplied).

Supported format*

1

PCM: 44.1/48/88.2/96/176.4/192 kHz (16/
24/32 bit)
DSD (DSF/DSDIFF): 2.8 MHz (1 bit)

*

1

Compatibility with all encoding/writing 
software, recording devices and recording 
media cannot be guaranteed.

*

2

Files with DRM (Digital Rights Management) 
copyright protection or files downloaded from 
an online music store cannot be played on this 
system. If you try to play one of these files, the 
system plays the next unprotected audio file.

*

3

Output by converting to PCM.

CD-DA/MP3 player section

System: 

Compact disc and digital audio system

Laser Diode Properties:

Emission Duration: Continuous
Laser Output*

1

: Less than 44.6 μW

*

1

This output is the value measurement at a 
distance of 200mm from the objective lens 
surface on the Optical Pick-up Block with 7mm 
aperture.

Frequency response: 

20 Hz – 20 kHz

Signal-to-noise ratio: 

More than 90 dB

Dynamic range: 

More than 90 dB

Tuner section

AM tuner section (HCD-SX7 only):

Tuning range:

European models:
531 kHz – 1,602 kHz (with 9 kHz tuning 
interval)

Asian models:
530 kHz – 1,610 kHz (with 10 kHz tuning
interval)
531 kHz – 1,602 kHz (with 9 kHz tuning
interval)

Other models:
530 kHz – 1,710 kHz (with 10 kHz tuning 
interval)
531 kHz – 1,710 kHz (with 9 kHz tuning 
interval)

Intermediate frequency:
400 kHz

FM tuner section:

FM stereo, FM superheterodyne tuner

Tuning range:
87.5 MHz – 108.0 MHz (50 kHz step) 
(Except Canadian model)
87.5 MHz – 108.0 MHz (100 kHz step) 
(Canadian model)

DAB/DAB+ tuner section (HCD-SX7B only):

FM stereo, DAB/FM superheterodyne tuner

Frequency range:
Band-III: 
174.928 (5A) MHz – 239.200 (13F) MHz*

1

DAB/DAB+ frequency table (Band-III):

Frequency

Label

5A

174.928 MHz

5B

176.640 MHz

5C

178.352 MHz

5D

180.064 MHz

6A

181.936 MHz

6B

183.648 MHz

6C

185.360 MHz

6D

187.072 MHz

7A

188.928 MHz

7B

190.640 MHz

7C

192.352 MHz

7D

194.064 MHz

8A

195.936 MHz

8B

197.648 MHz

8C

199.360 MHz

8D

201.072 MHz

9A

202.928 MHz

9B

204.640 MHz

*

1

Frequencies are displayed to two decimal places 
on this system.

BLUETOOTH section

Communication system:

BLUETOOTH Standard version 3.0

Output:

BLUETOOTH Standard Power Class 2

Maximum communication range:

Line of sight approx. 10 m

*1

Frequency band:

2.4 GHz band (2.4000 GHz - 2.4835 GHz)

Modulation method:

FHSS

Compatible BLUETOOTH profiles

*2

:

A2DP (Advanced Audio Distribution Profile)
AVRCP (Audio Video Remote Control Profile)

Supported content protection method

SCMS-T method

Supported codec

SBC (Sub Band Codec), AAC, LDAC

Transmission bandwidth

20 Hz – 20,000 Hz (with 44.1 kHz sampling)

*

1

The actual range will vary depending on factors 
such as obstacles between devices, magnetic 
fields around a microwave oven, static 
electricity, reception sensitivity, antenna’s 
performance, operating system, software 
application, etc.

*

2

BLUETOOTH standard profiles indicate the 
purpose of BLUETOOTH communication 
between devices.

Network section

LAN port:

RJ-45
10BASE-T/100BASE-TX
(The communication speed may vary 
depending on the communication 
environment. This system does not 
guarantee the communication speed and 
quality of 10BASE-T/100BASE-TX.)

Wireless LAN:

Compatible standards:
IEEE 802.11 a/b/g/n (WEP 64 bit, WEP 128 
bit)
Frequency band 2.4/5 GHz band

206.352 MHz

9C

208.064 MHz

9D

209.936 MHz

10A

211.648 MHz

10B

213.360 MHz

10C

215.072 MHz

10D

216.928 MHz

11A

218.640 MHz

11B

220.352 MHz

11C

222.064 MHz

11D

223.936 MHz

12A

225.648 MHz

12B

227.360 MHz

12C

229.072 MHz

12D

230.784 MHz

13A

232.496 MHz

13B

234.208 MHz

13C

235.776 MHz

13D

237.488 MHz

13E

239.200 MHz

13F

Frequency

Label

WEP 64 bit, WEP 128 bit
WPA/WPA2-PSK (AES)
WPA/WPA2-PSK (TKIP)

Compatible formats:

PCM 192 kHz/24 bit, DSD 2.8 MHz/1 bit
DSD (DSF, DSDIFF), LPCM (WAV, AIFF), FLAC, 
ALAC, MP3, AAC, WMA

General

Power requirements:

Canadian model:
AC 120 V, 60 Hz

Latin America models (except for Argentina
models):
AC 120 V - 240 V, 50 Hz/60 Hz

Other models:
AC 220 V - 240 V, 50 Hz/60 Hz

Power consumption: 

46 watts

Dimensions (W/H/D) (incl. projecting parts, 
without speakers):

Approx. 225 mm x 115 mm x 263 mm

Mass (without speakers):

Approx. 2.7 kg

Design and specifications are subject to 
change without notice.

Supported format*

1

MP3: 32/44.1/48 kHz, 16 - 320 kbps (CBR/
VBR)
AAC*

2

: 32/44.1/48/88.2/96 kHz, 16 - 320 

kbps (CBR/VBR)
WMA*

2

: 32/44.1/48 kHz, 16 - 320 kbps (CBR/

VBR)
WAV: 32/44.1/48/88.2/96/176.4/192 kHz 
(16/24 bit)
AIFF: 32/44.1/48/88.2/96/176.4/192 kHz (16/
24 bit)
FLAC: 32/44.1/48/88.2/96/176.4/192 kHz 
(16/24 bit)
ALAC: 32/44.1/48/88.2/96/176.4/192 kHz 
(16/24 bit)
DSD*

3

 (DSF/DSDIFF): 2.8 MHz (1bit)

(Type A)

(Type B)

Standby power consumption: 0.5 W (all wireless 
network ports off)
Networked Standby mode: 6 W (all wireless 
network ports on)

Standby power consumption: 0.5 W (all wireless 
network ports off)
Networked Standby mode: 6 W (all wireless 
network ports on)

* When the multi-room function turns on, it 

supports TDLS (Tunneled Direct Link Setup) 
and works as a wireless router that improves 
the data communication quality (Version 1.60 
or later).

Note:

 Refer to “TYPE OF AEP 

AND UK MODELS” on 
page 6 for Type A/B.

SYS SET

2020/02/27 22:53:44 (GMT+09:00)

Summary of Contents for HCD-SX7























































































Reviews: