background image

model name [SHAKE-99/SHAKE-77/SHAKE-55/SHAKE-33]

[4-487-569-

14

(1)] GB

39

GB

filename[D:\NORM'S JOB\SONY HA\SO140043\SHAKE-99_77_55_33 (PMRF 
04)\4487569141_GB\080ADD.fm]

masterpage:Right

Ad
di

tio

n

a

l In
fo

rm

at

io

n

• If the transfer and erase operations are 

repeated multiple times, the file 
structure within the USB device 
becomes fragmented. Refer to the 
operating instructions supplied with the 
USB device on how to deal with this 
problem.

• The USB device was disconnected or 

the power was turned off during 
transfer. Delete the partially-transferred 
file, and perform the transfer again. If 
this does not fix the problem, the USB 
device may be broken. Refer to the 
operating instructions of the USB 
device on how to deal with this problem.

Audio files or folders on the USB 
device cannot be erased.

• Check if the USB device is write-

protected.

• The USB device was disconnected or 

the power was turned off during the 
erase operation. Delete the partially-
erased file. If this does not fix the 
problem, the USB device may be 
broken. Refer to the operating 
instructions of the USB device on how 
to deal with this problem.

There is no sound.

• The USB device is not connected 

correctly. Turn off the system and 
reconnect the USB device, then turn on 
the system and check if “USB A” or 
“USB B” lights up in the display panel.

There is noise, skipping, or distorted 
sound.

• You are using an unsupported USB 

device. Check the information on the 
website about compatible USB devices 
(page 36).

• Turn off the system and reconnect the 

USB device, then turn on the system.

• The music data itself contains noise, or 

the sound is distorted. Noise may have 
entered during the transfer process. 
Delete the file, and try transfer again.

• The bit rate used when encoding audio 

files was low. Send audio files with 
higher bit rate to the USB device.

“READING” is displayed for an 
extended time, or it takes a long time 
before playback starts.

• The reading process can take a long time 

in the following cases.
– There are many folders or files on the 

USB device (page 18).

– The file structure is extremely 

complex.

– The memory capacity is excessive.
– The internal memory is fragmented.

“OVER CURRENT” appears.

• A problem has been detected with the 

level of electrical current from the 

 

port or 

 

B port. Turn off the system 

and remove the USB device from the 
port. Make sure there is no problem with 
the USB device. If this display pattern 
persists, contact your nearest Sony 
dealer.

Erroneous display.

• The data stored in the USB device may 

have been corrupted, perform the 
transfer again.

• The character codes that can be 

displayed by this system are as follows:
– Upper  cases  (A  to  Z)
– Numbers (0 to 9)
– Symbols (< > * +, [ ] \ _)
Other characters appear as “_”.

The USB device is not recognized.

• Turn off the system and reconnect the 

USB device, then turn on the system.

• Check the information on the website 

about compatible USB devices 
(page 36).

• The USB device does not work 

properly. Refer to the operating 
instructions of the USB device on how 
to deal with this problem.

Playback does not start.

• Turn off the system and reconnect the 

USB device, then turn on the system.

• Check the information on the website 

about compatible USB devices 
(page 36).

Summary of Contents for HCD-SHAKE33

















































Reviews: