![background image](http://html.mh-extra.com/html/sony/hcd-rg55/hcd-rg55_service-manual_420855005.webp)
5
HCD-RG55/RG55S
SECTION 1
SERVICE NOTE
1
Cut the fifteen melted-connection points
with a cutting plier.
3
Cut the seven melted-connection points
with a cutting plier.
2
PANEL board
4
KEY board
PANEL board
(eleven screw holes)
KEY board
(six screw holes)
Screw hole
In order to re-install the panel board and the key board,
fix them by using the screws (+BVTP 2.6
×
8 ) respectively.
Screw in to the respective screw holes.
Do not tighten the screws excessively.
* The panel board and the key board only are connected to the front panel
by means of hot-melting the plastics.
Note for installing the panel board and the key board
REMOVING THE PANEL BOARD AND THE KEY BOARD
Hot melt