Sony HCD-G2500, Service Manual

Page: 4 / 55

HCD-G2500/XB20/XB22
US Model
HCD-G2500
AEP Model
UK Model
HCD-XB20
E Model
Australian Model
HCD-XB22
SERVICE MANUAL
MINI Hi-Fi COMPONENT SYSTEM
MICROFILM
— Continued on next page —
SPECIFICATIONS
Model Name Using Similar Mechanism NEW
CD Mechanism Type CDM375BD29
Base Unit Type KSM-213ECM
Optical Pick-up Type KSS-213B/SN
Model Name Using Similar Mechanism HCD-GRX2/RX33
DECK-A TK20FX-SW943-800
DECK-B TK20FX-SW943-800
CD
SECTION
TAPE
DECK
SECTION
Tape Transpor
Mechanism Type
• This set is the tuner, deck, CD and amplifier
section in LBT-G2500/XB20/XB22.
Photo : HCD-XB20
Peak music power output (Reference)
800 W
Inputs
PHONO IN (phone jacks):
sensitivity 3 mV, impedance 47 kilohms
Outputs
PHONES (stereo phone jack):
accepts headphones of 8
Ω
or more
SPEAKER: accepts impedance of 6 to 16
Ω
CD player section
System Compact disc and degital audio system
Laser Semiconductor laser (
λ
= 780 nm)
Emission duration: continuous
Laser output Max.44.6 µW*
*This output is the value measured at a
distance of 200 mm from the objective
lens surface on the Optical Pick-up Block
with 7 mm aperture
Frequency response 20 Hz – 20 kHz (±0.5 dB)
Wavelength 780 – 790nm
Tape deck section
Recording system 4-track 2-channel stereo
Frequency response 60 – 13,000 Hz (±3 dB),
(DOLBY NR OFF) using a Sony TYPE I cassette
AUDIO POWER SPECIFICATIONS:
(U.S.A. model only)
POWER OUTPUT AND TOTAL HARMONIC DISTORTION:
With 6
Ω
loads both channels driven, from 70 – 20,000 Hz; rated 60 W
per channel minimum RMS power, with no more than 0.9% total
harmonic distortion from 250 mW to rated output.
Amplifier section
North American model
Continuous RMS power output
70 W + 70 W (6
Ω
at 1 kHz, 10% THD)
Total harmonic distortion
less than 0.09% (6
Ω
at 1kHz, 30 W)
European model
DIN power output (Rated) 60 W + 60 W (6
Ω
at 1 kHz, DIN)
Continuous RMS power output (Reference)
70 W + 70 W (6
Ω
at 1 kHz, 10% THD)
Music power output (Reference)
120 W + 120 W (6
Ω
at 1 kHz, 10%THD)
Other models
The following measured at AC 110,220 V 60 Hz;
DIN power output (Rated) 45 W + 45 W (6
Ω
at 1 kHz, DIN)
Continuous RMS power output (Reference)
55 W + 55 W (6
Ω
at 1 kHz, 10% THD)
The following measured at AC 120, 240 V 60Hz;
DIN power output (Rated) 50 W + 50 W (6
Ω
at 1 kHz, DIN)
Continuous RMS power output (Reference)
60 W + 60 W (6
Ω
at 1 kHz, 10% THD)
*
Dolby noise reduction manufactured under
license from Dolby Laboratories Licensing
Corporation.
“DOLBY” and the double-D symbol
a are
trademarks of Dolby Laboratories Licensing
Corporation.
www.freeservicemanuals.info It`s free All over the world