14
HCD-CP555/NXM1
SECTION 4
TEST MODE
[Change-over of AM Tuner Step between 9 kHz and 10 kHz]
• A step of AM channels can be changed over between 9 kHz
and 10 kHz.
Procedure:
1. Press
?/1
button to turn the set ON.
2. Select the function “TUNER”, and press
[TUNER/BAND]
button to select the BAND “AM”.
3. Press
?/1
button to turn the set OFF.
4. Press
x
and
?/1
buttons simultaneously, and the display
of fluorescent indicator tube changes to “AM 9 kHz step” or
“AM 10 kHz step”, and thus the channel step is changed over.
[Cold Reset]
• The cold reset clears all data including preset data stored in
the RAM to initial conditions. Execute this mode when
returning the set to the customer.
Procedure:
1. Press three buttons
x
,
[DIMMER]
,and
?/1
simultaneously.
[Switching MD/VIDEO Functions]
Procedure:
1. Press the
?/1
button to turn the set ON.
2. Press the
?/1
button while holding the VIDEO/MD button
depressed to toggle between “MD” and “VIDEO.” The
selected mode is displayed.
[Error code indication]
Procedure:
1. Press the
?/1
button to turn the set ON.
2. Select the “CD” function.
3. Press the
x
,
X
, and
[DISPLAY]
buttons simultaneously.
4. The error code is displayed.
5. Press the
[]
button to display the next error code.
Press the
[TUNING -]
button to display the previous error
code.
[Aging Mode]
This mode can be used for operation check CD section and Tape
deck section.
The aging operation stops and is displayed status.
The aging operation continues repeatedly
3. Press three buttons
x
,
X
, and
[DISC 3]
simultaneously.
The “Aging in” display and aging mode is set.
4. Press
[DISC 1]
button, starts aging mode of all trays check.
5. Press
[DISC 2]
button ,starts measurement loading time.
6. To exit from the aging mode perform
[Cold Reset]
.
1) Error display
Disc error
Display
Error
E00D01022
Focus error (No disc)
E00D02022
Sub Q error (Focus is good)
E00D02023
TOC reading error
E00D02014
Access error (Unable within regular time)
Mechanism error
Display
Error
E00M__E_0
Error during opening tray
E00M__C_2
EX-CHANGE disc error
E00M__D_0
Error during closing tray
E00M__F_3
EX-OPEN error
E00M__D_5
EX-CLOSE error
E00M__C_2
Chuck-up error
E00M__C_3
Unchucking error
2. Aging mode in Tape Deck section
Procedure:
1. Load the tapes into the decks A and B respectively.
2. Press
?/1
button on the set ON
3. Select the function “TAPE A”
4. Press three buttons
x
,
X
, and
[TAPE A/B]
simultaneously, and aging mode is started.
5. To exit from the aging mode perform
[Cold Reset]
.
• In the aging mode ,the program is executed in the following
sequence.
Step
Operation
Display
1
Rewind the TAPE A
TAPE A AG-1
2
Rewind the TAPE B
TAPE B AG-1
3
Play the TAPE A (
t
) (2 minute)
TAPE A AG-2
4
F•F. (AMS) the TAPE A
TAPE A AG-3
5
Play the TAPE A (
T
) (2 minute)
TAPE A AG-4
6
Rewind the TAPE A
TAPE A AG-5
7
Play the TAPE B (
t
) (2 minute)
TAPE B AG-2
8
F•F.(AMS) the TAPE B
TAPE B AG-3
9
Play the TAPE B (
T
) (2 minute)
TAPE B AG-4
10
Rewind the TAPE B
TAPE B AG-5
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299