![background image](http://html.mh-extra.com/html/sony/hcd-461/hcd-461_operating-instructions-manual_420578009.webp)
9
4
Press T.TONE to set to on.
"TEST TONE" appears on the display and the test
tone will be heard from each speaker in the
following order.
In NORMAL or WIDE mode:
LEFT(front)
(
CENTER
(
RIGHT(front)
REAR(L+R)
9
In PHANTOM mode:
FRONT(L+R)
REAR(L+R)
9
In 3CH mode:
LEFT(front)
(
CENTER
(
RIGHT(front)
5
Adjust the volume level so that the sound
from each speaker is the same level at the
listening position.
A
To adjust the level of center speaker(s)
(except for PHANTOM mode).
Press CENTER VOL/TV VOL +/–.
The adjusted center level is indicated on the display.
B
To adjust the level of rear speakers
(except for 3CH. mode).
Press REAR VOL/TV CH +/–.
The adjusted rear level is indicated on the display.
(Turning the MASTER VOLUME control on the
unit, adjusts all speakers simultaneously.)
• To adjust the center level or rear level,
TREBLE/CENTER –/+ or BASS/REAR –/+ on
the main unit can also be used.
6
After adjusting, press T.TONE to turn off the
test tone.
"TEST TONE" disappears.
Adjusting the Speaker Volume
For maximum enjoyment of surround sound when playing
any program source, adjust the front, rear, and center (if
connected) speakers to the same volume level. The
adjustment must be done with a test tone in the DOLBY
SURROUND mode, but once the level is adjusted it can be
used for all surround modes.
You can adjust the volume level from your listening
position by using the remote.
BASS/REAR –/+
MASTER
VOLUME
1
Press SURROUND ON/OFF to ON.
"SURROUND ON" appears in the display.
2
Press SURROUND MODE so that "DOLBY
SUR" appears on the display.
3
Select the Dolby pro logic mode with the
DOLBY PRO LOGIC MODE buttons on the
main unit according to your speaker system.
The selected mode is displayed.
(
1
2
3
TREBLE/CENTER –/+
(
(
1
2
4, 6
5
-B
MASTER
/–
5-
A