![background image](http://html.mh-extra.com/html/sony/hcd-461/hcd-461_operating-instructions-manual_420578023.webp)
23
4
Press
·
to start playback.
The
(
indicator lights up.
·
Skipping to the next track programed
Press
±
during playback.
Going back to the beginning of the track being
played
Press
≠
during playback.
To stop program play
Press
p
. The last selection number programed will be
displayed.
To resume playback, press
·
. Play begins from the
beginning of the program.
You can play the same program repeatedly as long as you do
not cancel program play or erase the program.
To program while observing the disc labels
Leave the disc table open.
To check the program contents
Press CHECK. Each time the button is pressed, the program
contents are displayed in the programed order.
To cancel program play
Press CONTINUE and return to the continuous playback
mode. The program will be erased.
To cancel all the programed tracks
Press
p
to cancel in stop mode.
If the disc table is opened or the power is turned off, the
program contents are also erased.
To program for recording
After steps 1 to 3-A or 3-B3), press
P
to insert a pause and
program the selections for side B by performing step 3-A to
3-B3).
When the selections for side A have been played, the unit
will pause. ("B" lights up.)
Set the tape to the beginning of side B, then press
·
or
P
.
The selections for side B will start to play back.
Notes
• The playing time for track numbers higher than 20 will not
be added into the total playing time.
• When tracks have been programed for sides A and B, the
display shows the tracks programed for side B and the
total playing time for side B in stop mode.
A
1
2
3
4
5
1
PROGRAM
EDIT
MIN
SEC
2
3
4
5
6
7
8
9 10
11 12 13 14 15
16
With time edit, you can easily record from CD. Just
designate the length of your tape, and time edit
automatically programs the tracks that will fit onto each side.
1
Press DISC SKIP to select the disc to be
played.
DISC
SKIP
2
Press EDIT.
EDIT
2, 4, 5
1
Blinks
"EDIT" lights up and "A" blinks.
SYSTEM POWER
n
ON
·
3
Designating the Total
Playing Time – Time Edit
(Continued)