HBD-E385/E390/T39
8
3. Optical device (KEM480AAA) replacement
Flow of replacement:
Note:
The photo in
fl
ow is an image.
Procedure:
1. Remove the INSULATOR (4 pieces) and broken optical de-
vice (KEM480AAA) from LOADING ASSY.
2. Take photo of the barcode on new optical device
(KEM480AAA) bottom side by digital camera.
3. Assemble the INSULATOR (4 pieces) to new optical device
(KEM480AAA),
fi
x (Torque value: 2 kgf) it to LOADING
ASSY with screw, and assemble this unit.
4. Drag & drop the taken photo by step 2 to “BDPRdec.exe”, and
make the text data (File name: BuData.txt).
5. Save the text data to USB memory.
6. Connect USB memory with front USB connector on this unit,
and turn the power on.
7. Press the [FUNCTION] button on the remote commander to
select “BD/DVD”.
8. Press the buttons on the remote commander in order of
[DISPLAY], [0], [2], [1], [SUBTITLE], and enter the service
mode.
9. Press the buttons on the remote commander in order of [8], [1],
[ENTER], and execute “[1] Drive OP data Write”.
10. Turn the power off after writing the OP data.
11. Turn the power on, and enter the service mode again.
12. Press the buttons on the remote commander in order of [8], [7],
[3], [ENTER], and the dIOP value is displayed.
13. Con
fi
rm value is the following speci
fi
cation value, and turn the
power off.
Speci
fi
cation value:
BD
:
3 mA
DVD/CD
:
3 mA
14. Turn the power on, con
fi
rm playback performance of the BD
(BLX-104)/DVD (HLX-514)/CD (HLX-A1).
15. Completely assemble this unit, and complete the repair.
\/1
– Front view –
Front USB connector
Barcode label on
new optical device
(KEM480AAA)
bottom side
Take photo (JPEG)
by digital camera
Save the text data
to USB memory
(memory capacity
need not be 8GB)
Connect USB memory
with front USB connector
on this unit, and read the
text data by the service mode
Change photo into
the text data with
the barcode decoder
