16
HAR-D1000
CD SECTION
Set the CD test mode when performing confirmations (refer to page 5).
After completing confirmation, release the CD test mode.
1. C1, C2 ERROR DISPLAY
Procedure:
(1)
Enter the CD test mode, then rotate the
[ALBUM]
dial to display “1> ERROR”, and press the
[ALBUM]
dial.
(2)
C1 error and C2 error are displayed on the left side and right side with 4-digit codes respectively.
(3)
To exit from this mode, press the
[MENU/NO]
button.
2. DISC SPEED SELECTION
Procedure:
(1)
Enter the CD test mode, then rotate the
[ALBUM]
dial to display “2> SPEED
×
1”, and press the
[ALBUM]
dial.
(2)
Each time the
[ALBUM]
dial is pressed, the speed changes over such as
×
1
t
×
2
t
×
4
t
×
1.
(3)
To exit from this mode, press the
[MENU/NO]
button.
3. TRK ON/OFF
Procedure:
(1)
Enter the CD test mode, then rotate the
[ALBUM]
dial to display “9> TRK ON”, and press the
[ALBUM]
dial.
(2)
Switch the tracking servo ON/OFF.
(3)
To exit from this mode, press the
[MENU/NO]
button.
CD Aging Test
Procedure:
1.
Set CD in the set.
2.
Enter the test mode, then turn the
[ALBUM]
dial to display “<CD Aging> 12”, and press the
[ALBUM]
dial.
3.
CD aging test starts with reading the first track, reading the last track, tray open, tray close and TOC reading.
4.
The aging cycle is repeated.
5.
To exit from this mode, press the
x
(CD) button.
6.
Take out CD from the set.
