14
HAR-D1000
This set provides various modes for the service.
Enter the test mode through the procedure given below, and select the desired mode.
Procedure:
1. Press the
x
(CD),
x
(HDD) and
[YES]
buttons at the same time.
2. Press the
[ALBUM]
dial and
x
(HDD) button to display “<To Normal> 0”.
3. At this time, turn the
[ALBUM]
dial can select all modes. For the contents of mode, see the following table.
4. To exit from the test mode, turn the
[ALBUM]
dial to display “<To Normal> 0”, then press the
[ALBUM]
dial.
Contents of test mode
SECTION 4
TEST MODE
CD Test Menu
HD Test Menu
Display
Function
0> COMMAND
Command transfer menu (Not for Service)
1> ERROR
C1, C2 error display
2> SPEED X1
Disc speed selection
3> ISRC
ISRC display (Not for Service)
4> CHECK8
Check 8 cm display (Not for Service)
5> AUTO G
Auto gain display (Not for Service)
6> HENSHIN
Decentiering display (Not for Service)
7> PORT
Port selection (Not for Service)
8> AMS ON
AMS ON/OFF display (Not for Service)
9> TRK ON
TRK ON/OFF display
A> SJI
(Not for Service)
Display
Function
Format?
Formatting the HD
Flash Init?
Initialization of Flash
Read Test?
Sector read test of the HD
Write Test?
Sector write test of the HD
R/W Test?
Sector write read and verify test of the HD
Smart?
Display of S.M.A.R.T. status
No.
Display
Function
0
<To Normal> 0
Exit from test mode
1
<Version> 1
Microcomputer Version display
2
<FLD> 2
FL display test & LED display test
3
<Key, Jog> 3
Key/Jog input test
4
<CD Test> 4
CD all sorts test
5
<HD Test> 5
HD all sorts test
6
<HD Aging> 6
HD aging
7
<Initial> 8
All reset (Not for Service)
8
<Sircs> 10
Sircs code mode (Not for Service)
9
<Dump> 11
Microcomputer Dump mode (Not for Service)
10
<CD Aging> 12
CD aging
11
<CD Ship> 16
Shipment mode (Not for Service)
