31
Advanced operations
You can record a still picture like a photograph for about seven seconds. This photo
recording is useful when you want to enjoy a picture such as a photograph or when you
print a picture using a video printer (not supplied). You can record about 510 pictures on a
60-minute tape in SP mode.
(
1
)
While pressing the small green button on the POWER switch, set it to CAMERA.
(
2
)
Keep pressing PHOTO lightly until a still picture and “PHOTO CAPTURE” appear on
the LCD screen or in the viewfinder.
Recording does not start yet. To change the still picture, release PHOTO, select still
picture again, and keep pressing PHOTO lightly again.
If you press PHOTO on the Remote Commander when a still picture appears on the LCD
screen or in the viewfinder, the camcorder will record that still picture. However, you
cannot select other still pictures by using this button.
(
3
)
Press PHOTO deeper.
“PHOTO REC” flashes and the still picture on the LCD screen or in the viewfinder is
recorded for about seven seconds. The sound during those seven seconds is also recorded
and the pictures appear like an animation on the LCD screen or in the viewfinder. You
cannot change the POWER switch or press PHOTO during recording.
Note on the still picture
When the still picture recorded on this camcorder is played back on another VCR, the
picture may be blurred. This is not a malfunction.
When you press PHOTO while recording a photo
The picture on the LCD screen or in the viewfinder whenever you press PHOTO will be
recorded. You cannot check the recorded picture by pressing PHOTO lightly.
After the moving picture is recorded as a still picture for about seven seconds, the camcorder
will go back to Standby mode.
Photo recording
2,3
1
POWER
V
T
R
C
A
ME
R
A
O
FF
PHOTO
Summary of Contents for Handycam Vision DCR-TRV9
Page 95: ......
