Table of C
on
ten
ts
Sear
ch image
Inde
x
GB
Sound is not recorded correctly.
If you disconnect an external microphone, etc.
during recording movies, sound may not be
recorded correctly.
Connect the microphone again in the same
way as when you start recording movies.
No sound will be recorded if Audio Rec Level
(p. 78) is set to minimum.
Playback
Images cannot be played back.
Select the image quality of the movie you want
to play back (p. 42).
Images recorded on other devices may not be
played back. This is not a malfunction.
Photos cannot be played back.
Photos cannot be played back if you have
modified files or folders, or have edited the
data on a computer. (The file name flashes in
that case.) This is not a malfunction.
is indicated on a thumbnail.
This may appear on an image recorded on
other devices, edited on a computer, etc.
You removed the AC Adaptor or the battery
pack while the memory card icon at the top
right corner of the screen flashes, or before
the access lamp is turned off after recording.
This may damage your image data and is
displayed.
is indicated on a thumbnail.
The image data base file may be damaged.
Check the data base file by touching
(MENU)
[Setup]
[Repair Img. DB F.]. If it still appears, delete
the image with (p. 50).
No sound or only a quiet sound is heard
during playback.
Turn up the volume (p. 36).
Left and right sound will be heard
unbalanced when playing back movies on
computers or other devices.
This happens when sound recorded in 5.1ch
surround is converted to 2ch (normal stereo
sound) by a computer or other device. This is
not a malfunction.
Change the sound conversion type (downmix
type) when playing back on 2ch stereo devices.
Refer to the instruction manual supplied with
your playback device for details.
Change the sound to 2ch when creating a disc
using the supplied software “PMB.”
Record sound with [Audio Mode] set to [2ch
Stereo] (p. 78).
Playing back images stored on
memory card on other devices
Images cannot be played back or the
memory card is not recognized.
The playback device does not support playing
back memory cards (p. 4).
Editing movies/photos on your
camcorder
Unable to edit.
Unable to edit because of the condition of the
image.
A movie cannot be divided.
A movie that is too short cannot be divided.
A protected movie cannot be divided.
A photo cannot be captured from a
movie.
The memory card where you want to save
photos is full.
