Sony Handycam CCD-TR311, Service Manual

Page: 117 / 165

5-41
2. AFC f0 Adjustment (VC-195 board)
Adjust the pull-in range of the A/D converted clock generator during
playback.
Mode VTR stop
Signal No signal
Measurement Point Pin
4
of CN910 (AGC f0)
Measuring Instrument Digital voltmeter
Adjustment Page F
Adjustment Address 4A
Specified Value A = 2.10
±
0.05Vdc
Adjusting method:
1) Select page: 0, address: 01, and set data: 01.
2) Select page: 3, address: 01, set data: 4D, and press the PAUSE
button of the adjusting remote commander.
3) Select page: F, address: 4A, change the data and set the DC
voltage (A) to the specified value.
4) Press the PAUSE button of the adjusting remote commander.
5) Select page: 3, address: 01, set data: 00, and press the PAUSE
button of the adjusting remote commander.
6) Select page: 0, address: 01, and set data: 00.
3-4. VIDEO SYSTEM ADJUSTMENTS
Video system adjustments must be performed in the following order.
[Adjusting Order]
1.
28MHz origin oscillation adjustment
2. AFC f0 adjustment
3. Filter f0 adjustment
4. Y OUT level adjustment
5. C OUT level adjustment
6. RP filter f0 adjustment
7. Hi8 REC Y current adjustment
8. Standard REC Y current adjustment
9. Hi8 REC L level adjustment
10. Standard8 REC L level adjustment
11. REC C current adjustment
1. 28 MHz Origin Oscillation Adjustment (VC-195 board)
Set the frequency of the clock for synchronization.
If deviated, the synchronization will be disrupted and the color will
become inconsistent.
Mode VTR stop
Signal No signal
Measurement Point Pin
^§
of IC202 or pin
!™
of IC501
Measuring Instrument Frequency counter
Adjustment Page F
Adjustment Address 2C
Specified Value Pin
^§
of IC202 :
f=3579545
±
17Hz (NTSC)
f=4433618.75
±
17Hz (PAL)
Pin
!™
of IC501 :
f=14318181
±
68Hz (NTSC)
f=14187500
±
55Hz (PAL)
Note 1:
NTSC MODEL: CCD-TR311
PAL MODEL:
CCD-TR311E/TR411E/TR412E/
TR511E/TR512E/TR640E/TR730E/
TR840E/TR845E
Adjusting method:
1) Select page: 0, address: 01, and set data: 01.
2) Select page: 3, address: 01, set data: 41, and press the PAUSE
button of the adjusting remote commander.
3) Select page: 2, address: 61, and set data: 30.
4) Select page: F, address: 2C, change the data and set the clock
frequency(f) to the specified value.
5) Press the PAUSE button of the adjusting remote commander.
6) Select page: 2, address: 61, and set data: 10.
7) Select page: 3, address: 01, set data: 00, and press the PAUSE
button of the adjusting remote commander.
6) Select page: 0, address: 01, and set data: 00.